Specifications
Product overview
- Grounding screw
- Terminal block connector
- DIP switch
- Alarm LED
- Power LED
- Power LED
- SFP network ports x2
- RJ45 network ports x2
LED indicators
| LED | Color | Indication |
| PWR1 | Green | Power 1 has power. |
| PWR2 | Green | Power 2 has power. |
| ALARM | Red | One or more events are triggering the alarm. |
Alarm LED definition
| PWR1 | PWR2 | Fiber Mode | LINK STATUS | Alarm LED | FAULT Alarm OUTPUT |
| NO | NO | - | - | - | OPEN |
| YES | YES | Switch | - | OFF | CLOSED |
| YES | NO | Switch | - | ON | OPEN |
| NO | YES | Switch | - | ON | OPEN |
| YES | YES | Redundant | Primary UP | OFF | CLOSED |
| YES | YES | Redundant | Primary DOWN | Slow blink for two seconds | OPEN |
| YES | NO | Redundant | Primary DOWN | Blink rapidly | OPEN |
| NO | YES | Redundant | Primary DOWN | Blink rapidly | OPEN |
| YES | NO | Redundant | Primary UP | ON | OPEN |
| NO | YES | Redundant | Primary UP | ON | OPEN |
SFP port LEDs
| Color | Indication |
| Amber (steady) | The link over the port is successfully established at 100Mbps. |
| Amber (blink) | The media converter is actively sending or receiving data over the port. |
| Green (steady) | The link over the port is successfully established at 1000Mbps. |
| Green (blink) | The media converter is actively sending or receiving data over the port. |
| Amber + green (steady) | The link through the port is successfully established at 2500Mbps. |
| Amber + green (blink) | The media converter is actively sending or receiving data over the port. |
RJ45 port LEDs
| LED | Color | Indication |
| 10/100 LNK/ACT | Amber (steady) | The link over the port is successfully established at 10Mbps or 100Mbps |
| Amber (blink) | The media converter is actively sending or receiving data over the port | |
| 1000 LNK/ACT | Green (steady) | The link over the port is successfully established at 1000Mbps |
| Green (blink) | The media converter is actively sending or receiving data over the port |
DIP switch
| DIP | Position | Function |
| Fiber Mode | ON | Fiber redundancy |
| OFF (default) | Switch mode |
Note
- If using the Switch mode, the media converter can use three or four ports.
- If using the Redundant mode, one of the two fiber ports will be redundant while the copper ports are in operation.