AXIS M3044-V Network Camera

This user manual describes several products. This means you may find instructions that aren’t applicable to your product.

To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support.

For more information about how to find and assign IP addresses, go to How to assign an IP address and access your device.

You can use the device with the following browsers:

*To use AXIS OS web interface with iOS 15 or iPadOS 15, go to Settings > Safari > Advanced > Experimental Features and disable NSURLSession Websocket.

If you need more information about recommended browsers, go to AXIS OS Portal.

1. Open a browser and enter the IP address or host name of the Axis device.

   If you do not know the IP address, use AXIS IP Utility or AXIS Device Manager to find the device on the network.

2. Enter the username and password. If you access the device for the first time, you must set the root password. See Set a new password for the root account.

3. The live view page opens in your browser.

1. Type a password. Follow the instructions about secure passwords. See Secure passwords.

2. Retype the password to confirm the spelling.

3. Click Create login. The password has now been configured.

The device password is the primary protection for your data and services. Axis devices do not impose a password policy as they may be used in various types of installations.

To protect your data we strongly recommend that you:

• Use a password with at least 8 characters, preferably created by a password generator.

• Don’t expose the password.

• Change the password at a recurring interval, at least once a year.

This section includes instructions about configuring your device. If you want to learn more about how certain features work, go to Learn more.

• Which capture mode to choose depends on the requirements of frame rate and resolution for the specific surveillance setup. For specifications about available capture modes, see the product’s datasheet. To find the latest version of the datasheet, go to axis.com.

There are different exposure mode options in the camera that adjusts aperture, shutter speed, and gain to improve image quality for specific surveillance scenes. Go to Settings > Image > Exposure and select between the following exposure modes:

• For most use cases, select Automatic exposure.

• For environments with certain artificial lighting, for example fluorescent lighting, select Flicker-free.

• For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and sun during daytime, select Flicker-reduced.

• To lock the current exposure settings, select Hold current.

You can create one or several privacy masks to hide parts of the image.

1. Go to Settings > Privacy mask.

2. Click New.

3. Adjust the size, color, and name of the privacy mask according to your needs.

To verify that a defined part of the image contains enough pixels to, for example, recognize the face of a person, you can use the pixel counter.

1. Go to Settings > System > Orientation.

2. Click .

3. In the camera’s live view, adjust the size and position of the rectangle around the area of interest, for example where you expect faces to appear.

   You can see the number of pixels for each of the rectangle’s sides (X and Y), and decide if the values are enough for your needs.

Use corridor format to better utilize the full field of view in a long and narrow area, for example a staircase, hallway, road, or tunnel.

1. Depending on your device, turn the camera or the 3-axis lens in the camera 90° or 270°.

2. If the device doesn’t have automatic rotation of the view, log in to the webpage and go to Settings > System > Orientation.

3. Click .

4. Rotate the view 90° or 270°.

Find out more at axis.com/axis-corridor-format.

To reduce noise in low-light conditions, you can adjust one or more of the following settings:

• Adjust the trade-off between noise and motion blur. Go to Settings > Image > Exposure and move the Blur-noise trade-off slider toward Low noise.

• Set the exposure mode to automatic.

• Note

  A high max shutter value can result in motion blur.

• To slow down the shutter speed, set max shutter to the highest possible value.

• Reduce sharpness in the image.

• Open the aperture.

Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range (WDR) makes both dark and bright areas of the image visible.

1. Go to Settings > Image > Wide dynamic range.

2. Turn on WDR.

3. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.

Find out more about WDR and how to use it at axis.com/web-articles/wdr.

• Go to Settings > Image > Capture mode and make sure to select the capture mode that has the highest resolution.

• Go to Settings > Stream > General and set the compression as low as possible.

• Go to Live view settings > Video format and select MJPEG streaming.

• Go to Settings > Stream > H.264 encoding and turn off Zipstream functionality.

This section includes instructions about configuring your device. To learn more about how streaming and storage works, go to Streaming and storage.

1. Go to live view and select H.264.

2. Go to Settings > Stream.

3. Do one or more of the following:

4. • Turn on the Zipstream functionality and select the desired level.

   • Turn on dynamic GOP and set a high GOP length value.

   • Increase the compression.

   • Turn on dynamic FPS.

Your camera can transmit a live video stream to an HDMI monitor even without a network connection. The monitor can be used for surveillance purposes or for public viewing, e.g. in a store.

1. Connect an external monitor using the HDMI connector.

2. Change the HDMI settings under Settings > System > HDMI.

1. To store recordings on the network, you need to set up your network storage.

2. Go to Settings > System > Storage.

3. Click Setup under Network storage.

4. Enter the IP address of the host server.

5. Enter the name of the shared location on the host server.

6. Move the switch if the share requires a login, and enter username and password.

7. Click Connect.

To record video you must first set up network storage, see Set up network storage, or have an SD card installed.

1. Record video

2. Go to the live view.

3. To start a recording, click Record. Click again to stop the recording.

1. Watch video

2. Click Storage > Go to recordings.

3. Select your recording in the list and it will play automatically.

You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions. The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects motion, or show an overlay text while the device is recording.

To learn more, check out our guide Get started with rules for events.

1. Go to Settings > System > Events to set up a rule. The rule defines when the device will perform certain actions. Rules can be setup as scheduled, recurring, or for example, triggered by motion detection.

2. Select the Condition that must be met to trigger the action. If you specify more than one condition for the rule, all of the conditions must be met to trigger the action.

3. Select which Action the device should perform when the conditions are met.

This example explains how to display the text “Motion detected” when the device detects motion.

Make sure that AXIS Video Motion Detection is running:

1. Go to Settings > Apps > AXIS Video Motion Detection.

2. Start the application if it is not already running.

3. Make sure you have set up the application according to your needs.

4. Add the overlay text:

5. Go to Settings > Overlay.

6. Enter #D in the text field.

7. Choose text size and appearance.

8. Create a rule:

9. Go to System > Events > Rules and add a rule.

10. Type a name for the rule.

11. In the list of conditions, select AXIS Video Motion Detection.

12. In the list of actions, select Use overlay text.

13. Select Camera 1.

14. Type “Motion detected”.

15. Set the duration.

16. Click Save.

This example explains how to set up the camera to start recording to the SD card five seconds before it detects motion and to stop one minute after.

1. Make sure that AXIS Video Motion Detection is running:

2. Go to Settings > Apps > AXIS Video Motion Detection.

3. Start the application if it is not already running.

4. Make sure you have set up the application according to your needs. If you need help, see the user manual for AXIS Video Motion Detection 4.

1. Create a rule:

2. Go to Settings > System > Events and add a rule.

3. Type a name for the rule.

4. In the list of conditions, under Application, select AXIS Video Motion Detection (VMD).

5. In the list of actions, under Recordings, select Record video while the rule is active.

6. Select an existing stream profile or create a new one.

7. Set the prebuffer time to 5 seconds.

8. Set the postbuffer time to 60 seconds.

9. In the list of storage options, select SD card.

10. Click Save.

A view area is a cropped part of the full view. You can stream and store view areas instead of the full view to minimize bandwidth and storage needs. If you enable PTZ for a view area, you can pan, tilt and zoom within it. By using view areas you can remove parts of the full view, for example, the sky.

When you set up a view area, we recommend you to set the video stream resolution to the same size as or smaller than the view area size. If you set the video stream resolution larger than the view area size it implies digitally scaled up video after sensor capture, which requires more bandwidth without adding image information.

A capture mode is a preset configuration that defines how the camera will capture images. The capture mode setting can affect the camera’s field of view and aspect ratio. The shutter speed can also be affected, which in turn will affect the light sensitivity.

The lower resolution capture mode may be sampled from the original resolution, or it may be cropped out from the original, in which case the field of view may also be affected.

The capture mode to choose depends on the requirements for the frame rate and resolution for the specific surveillance setup. For specifications about available capture modes, see the product’s datasheet at axis.com.

Overlays are superimposed over the video stream. They are used to provide extra information during recordings, such as a timestamp, or during product installation and configuration. You can add either text or an image.

Decide which compression method to use based on your viewing requirements, and on the properties of your network. The available options are:

Motion JPEG

Motion JPEG, or MJPEG, is a digital video sequence that is made up of a series of individual JPEG images. These images are then displayed and updated at a rate sufficient to create a stream that shows constantly updated motion. For the viewer to perceive motion video the rate must be at least 16 image frames per second. Full motion video is perceived at 30 (NTSC) or 25 (PAL) frames per second.

The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every image contained in the stream.

H.264 or MPEG-4 Part 10/AVC

H.264 can, without compromising image quality, reduce the size of a digital video file by more than 80% compared to the Motion JPEG format and by as much as 50% compared to older MPEG formats. This means that less network bandwidth and storage space are required for a video file. Or seen another way, higher video quality can be achieved for a given bitrate.

The Image tab contains camera settings that affect all video streams from the product. If you change something in this tab, it immediately affects all video streams and recordings.

The Stream tab contains settings for video streams. You get these settings if you request a video stream from the product and don’t specify for example resolution, or frame rate. When you change the settings in the Stream tab, it doesn’t affect ongoing streams, but it will take effect when you start a new stream.

The Stream profiles settings override the settings from the Stream tab. If you request a stream with a specific stream profile, the stream contains the settings of that profile. If you request a stream without specifying a stream profile, or request a stream profile that doesn't exist in the product, the stream contains the settings from the Stream tab.

Bitrate control helps you to manage the bandwidth consumption of your video stream.

Variable bitrate (VBR)Variable bitrate allows the bandwidth consumption to vary depending on the level of activity in the scene. The more activity, the more bandwidth you need. With variable bitrate you are guaranteed constant image quality, but you need to make sure you have storage margins.

Maximum bitrate (MBR)Maximum bitrate lets you set a target bitrate to handle bitrate limitations in your system. You might see a decline in image quality or frame rate as the instantaneous bitrate is kept below the specified target bitrate. You can choose to prioritize either image quality or frame rate. We recommend that you configure the target bitrate to a higher value than the expected bitrate. This gives you a margin in case there is a high level of activity in the scene.

1. Target bitrate

AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications.

To find the user manuals for Axis applications, go to help.axis.com.

AXIS People Counter is an analytic application that you can install on a network camera. You can use the application to count how many people pass through an entrance, in what direction they pass, and if more than one person passes during a predefined interval. You can also use it to estimate how many people are currently occupying an area, and the average visiting time.

The application runs embedded in the camera which means you don’t need a dedicated computer to run the application. AXIS People Counter is suitable for any indoor environment, like stores, libraries, or gyms.

How does estimating occupancy work?

You can use the application to estimate occupancy in areas with one or several entrances and exits. Each entrance and exit needs to be equipped with a network camera with AXIS People Counter installed. If there are several cameras, they communicate with each other over the network in a primary and secondary concept. The primary camera continuously fetches data from the secondary cameras and presents the data in the live view. Every fifteen minutes, the primary camera sends the statistical data to AXIS Store Data Manager. Consequently, the reports generated from AXIS Store Data Manager can present the data in a minimum of 15 minutes time interval.

To reset the product to the factory default settings:

1. Disconnect power from the product.

2. Press and hold the control button while reconnecting power. See Product overview.

3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber.

4. Release the control button. The process is complete when the status LED indicator turns green. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90.

5. Use the installation and management software tools to assign an IP address, set the password, and access the video stream.

   The installation and management software tools are available from the support pages on axis.com/support.

It is also possible to reset parameters to factory default through the web interface. Go to Settings > System > Maintenance and click Default.

Axis offers product firmware management according to either the active track or the long-term support (LTS) tracks. Being on the active track means continuously getting access to all the latest product features, while the LTS tracks provide a fixed platform with periodic releases focused mainly on bug fixes and security updates.

Using firmware from the active track is recommended if you want to access the newest features, or if you use Axis end-to-end system offerings. The LTS tracks are recommended if you use third-party integrations, which are not continuously validated against the latest active track. With LTS, the products can maintain cybersecurity without introducing any significant functional changes or affecting any existing integrations. For more detailed information about Axis product firmware strategy, go to axis.com/support/firmware.

Firmware is the software that determines the functionality of network devices. One of your first actions when troubleshooting a problem should be to check the current firmware version. The latest version may contain a correction that fixes your particular problem.

To check the current firmware:

1. Go to the product’s webpage.

2. Click the help menu .

3. Click About.

AXIS Device Manager can be used for multiple upgrades. Find out more at axis.com/products/axis-device-manager.

1. Download the firmware file to your computer, available free of charge at axis.com/support/firmware.

2. Log in to the product as an administrator.

3. Go to Settings > System > Maintenance. Follow the instructions on the page. When the upgrade has finished, the product restarts automatically.

If you can’t find what you’re looking for here, try the troubleshooting section at axis.com/support.

When setting up your system, it is important to consider how various settings and situations affect the performance. Some factors affect the amount of bandwidth (the bitrate) required, others can affect the frame rate, and some affect both. If the load on the CPU reaches its maximum, this also affects the frame rate.

The following factors are the most important to consider:

• High image resolution or lower compression levels result in images containing more data which in turn affects the bandwidth.

• Rotating the image in the GUI will increase the product's CPU load.

• Access by large numbers of Motion JPEG or unicast H.264 clients affects the bandwidth.

• Simultaneous viewing of different streams (resolution, compression) by different clients affects both frame rate and bandwidth.

  Use identical streams wherever possible to maintain a high frame rate. Stream profiles can be used to ensure that streams are identical.

• Accessing Motion JPEG and H.264 video streams simultaneously affects both frame rate and bandwidth.

• Heavy usage of event settings affects the product’s CPU load which in turn affects the frame rate.

• Using HTTPS may reduce frame rate, in particular if streaming Motion JPEG.

• Heavy network utilization due to poor infrastructure affects the bandwidth.

• Viewing on poorly performing client computers lowers perceived performance and affects frame rate.

• Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect the frame rate and the general performance.

AXIS M3044-V

1. Dome cover
2. Status LED
3. microSD card slot
4. Control button
5. Network connector (PoE)
6. Focus ring

AXIS M3045-V and AXIS M3046-V

1. Dome cover
2. HDMI connector
3. Status LED
4. microSD card slot
5. Control button
6. Network connector (PoE)
7. Focus ring

This product supports microSD/microSDHC/microSDXC cards.

For SD card recommendations, see axis.com.

microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.

• The control button is used for:

• Resetting the product to factory default settings. See Reset to factory default settings.

Use the HDMI^TM connector to connect a display or public view monitor.

RJ45 Ethernet connector with Power over Ethernet (PoE).