AXIS S3008 Recorder

About your device

AXIS S3008 Recorder is a compact network video recorder with a built-in PoE switch for easy installation. The device features a surveillance-grade hard drive. It also includes a USB port for easy export of video footage. The recorder comes in three models – including a 2 TB, 4 TB or 8 TB hard drive.

How many cameras can I connect to the recorder?

Up to eight devices can be connected to the PoE switch of the recorder.

How much power can the recorder supply to the cameras?

  • These are the limitations for power over Ethernet (PoE):
  • The recorder can supply up to eight devices with PoE.

  • The total amount of power available:

    • 2 TB and 4 TB: 65 W

    • 8 TB: 60 W

  • Each network port supports up to 15.4 W (PoE Class 3) at the PoE port (PSE) and 12.95 W on the camera side (PD).

  • The switch allocates PoE power based on the PoE class of the connected device.

Browser support

Windows®

  • ChromeTM (recommended)

  • Firefox®

  • Edge®

OS X®

  • ChromeTM (recommended)

  • Safari®

Other

  • ChromeTM

  • Firefox®

To find out more about how to use the device, see the Manual available at Documentation | Axis Communications.
If you want more information about recommended browsers, go to Axis OS browser support | Axis Communications.

Get started

The AXIS S3008 Recorder is used with version 4 of the AXIS Companion video management software.

Get started with AXIS Companion

  1. Note

    Internet access is required during the system setup.

  2. Installation overview:
  3. Register a My Axis account

  4. Install the hardware

  5. Install the desktop app

  6. Create a site

  7. Install the mobile app

Result of system installation:

  • The firmware is upgraded on all Axis devices.

  • A password is set for the devices.

  • The recordings are enabled with default settings.

  • The remote access is enabled.

Register a My Axis account

Register a My Axis account at axis.com/my-axis/login.

You can make your My Axis account more secure by activating multi-factor authentication (MFA). MFA is a security system that adds another layer of verification to ensure the user’s identity.

  1. Activate MFA:
  2. Log in with your My Axis credentials.

  3. Go to and select Account settings.

  4. Click Security settings

  5. Turn on 2–Step verification.

  6. You are redirected to a login page.
  7. Log in with your My Axis credentials.

  8. MFA is now active.
  1. Log in when MFA is active:
  2. Log in to your My Axis account.

  3. An email is sent to you.
  4. Open the email and click Authenticate.

  5. If you didn’t receive an email, check if it’s in your spam folder. If it’s not there, contact IT support.

Install the hardware

  1. Install your camera hardware.

  2. Connect the recorder to your network via the LAN port.

  3. Connect the cameras to the recorder’s integrated PoE switch or an external PoE switch.

  4. Connect the computer to the same network as the recorder.

  5. Connect the power supply to the recorder.

  6. Important

    You must first connect the power cord to the recorder, and then connect the power cord to the power outlet.

  7. Wait a few minutes for the recorder and cameras to boot up before proceeding.

CAUTION

Keep the recorder in a well ventilated environment and with plenty of empty space around the recorder to avoid overheating.

Install the desktop app

  1. Go to axis.com/products/axis-companion and click Download to download AXIS Companion version 4 for Windows.

  2. Open the setup file and follow the wizard.

  3. Sign in with your My Axis account.

Create a site

A site is a single point of entry to a surveillance solution, for example all cameras in a store. You can keep track of several sites through a single My Axis account.

Note

If you have used an earlier version of AXIS Companion, the sites you created will not appear in the list of sites in AXIS Companion version 4. You might also have devices that are not supported. See Migrating from AXIS Companion Classic to version 4 for more information.

  1. Start the AXIS Companion desktop app.

  2. Sign in with your My Axis account.

  3. Click Create new site.

  4. Name your site and enter your company name.

  5. Click Next.

  6. Select the devices you want to add to your site.

  7. Click Next.

  8. Select storage.

  9. Click Next.

  10. On the Ready to install page, Offline mode and Upgrade firmware are turned on by default. You can turn them off if you do not want to access offline mode or upgrade your devices to the latest firmware version.

  11. Click Install and wait while AXIS Companion configures the devices.

    The configuration may take several minutes.

Install the mobile app

With AXIS Companion mobile app, you can access your devices and recordings from anywhere. You can also get notifications when suspicious events occur, or when someone calls from an intercom.

For Android

Click Download or scan the following QR Code.

For iOS

Click Download or scan the following QR Code.

Open the AXIS Companion app and log in with your Axis credentials.

If you don’t have a My Axis account, you can go to axis.com/my-axis to register a new account.

The web interface

To reach the device’s web interface, type the device’s IP address in a web browser.

Show or hide the main menu.

Access the release notes.

Access the product help.

Change the language.

Set light theme or dark theme.

The user menu contains:

  • Information about the user who is logged in.

  • Change account : Log out from the current account and log in to a new account.

  • Log out : Log out from the current account.

The context menu contains:

  • Analytics data: Accept to share non-personal browser data.

  • Feedback: Share any feedback to help us improve your user experience.

  • Legal: View information about cookies and licenses.

  • About: View device information, including firmware version and serial number.

  • Legacy device interface: Change the device’s web interface to the legacy version.

Status

Device info

Shows the device information, including firmware version and serial number.

Upgrade firmware: Upgrade the firmware on your device. Takes you to the Maintenance page where you can do a firmware upgrade.

Time sync status

Shows NTP synchronization information, including if the device is in sync with an NTP server and the time remaining until the next sync.

NTP settings: View and update the NTP settings. Takes you to the Date and time page where you can change the NTP settings.

Security

Shows what kind of access to the device that is active, and what encryption protocols are in use. Recommendations to the settings are based on the AXIS OS Hardening Guide.

Hardening guide: Link to AXIS OS Hardening guide where you can learn more about cybersecurity on Axis devices and best practices.

Connected clients

Shows the number of connections and connected clients.

View details: View and update the list of connected clients. The list shows IP address, protocol, port, state, and PID/process of each connection.

Ongoing recordings

Shows ongoing recordings and their designated storage space.

Recordings: View ongoing and filtered recordings and their source. For more information, see

Shows the storage space where the recording is saved.

Apps

Add app: Install a new app.

Find more apps: Find more apps to install. You will be taken to an overview page of Axis apps.

Allow unsigned apps: Turn on to allow installation of unsigned apps.

Allow root-privileged apps: Turn on to allow apps with root privileges full access to the device.

View the security updates in AXIS OS and ACAP apps.

Note

The device’s performance might be affected if you run several apps at the same time.

Use the switch next to the app name to start or stop the app.

Open: Access the app’s settings. The available settings depend on the application. Some applications don’t have any settings.

The context menu can contain one or more of the following options:

  • Open-source license: View information about open-source licenses used in the app.

  • App log: View a log of the app events. The log is helpful when you contact support.

  • Activate license with a key: If the app requires a license, you need to activate it. Use this option if your device doesn’t have internet access.

    If you don’t have a license key, go to axis.com/products/analytics. You need a license code and the Axis product serial number to generate a license key.

  • Activate license automatically: If the app requires a license, you need to activate it. Use this option if your device has internet access. You need a license code to activate the license.

  • Deactivate the license: Deactivate the license to replace it with another license, for example, when you change from a trial license to a full license. If you deactivate the license, you also remove it from the device.

  • Settings: Configure the parameters.

  • Delete: Delete the app permanently from the device. If you don’t deactivate the license first, it remains active.

System

Time and location

Date and time

The time format depends on the web browser’s language settings.

Note

We recommend you synchronize the device’s date and time with an NTP server.

Synchronization: Select an option for the device’s date and time synchronization.

  • Automatic date and time (manual NTS KE servers): Synchronize with the secure NTP key establishment servers connected to the DHCP server.

    • Manual NTS KE servers: Enter the IP address of one or two NTP servers. When you use two NTP servers, the device synchronizes and adapts its time based on input from both.

  • Automatic date and time (NTP servers using DHCP): Synchronize with the NTP servers connected to the DHCP server.

    • Fallback NTP servers: Enter the IP address of one or two fallback servers.

  • Automatic date and time (manual NTP servers): Synchronize with NTP servers of your choice.

    • Manual NTP servers: Enter the IP address of one or two NTP servers. When you use two NTP servers, the device synchronizes and adapts its time based on input from both.

  • Custom date and time: Manually set the date and time. Click Get from system to fetch the date and time settings once from your computer or mobile device.

Time zone: Select which time zone to use. Time will automatically adjust to daylight saving time and standard time.

  • DHCP: Adopts the time zone of the DHCP server. The device must connected to a DHCP server before you can select this option.

  • Manual: Select a time zone from the drop-down list.

Note

The system uses the date and time settings in all recordings, logs, and system settings.

Device location

Enter where the device is located. Your video management system can use this information to place the device on a map.

  • Latitude: Positive values are north of the equator.

  • Longitude: Positive values are east of the prime meridian.

  • Heading: Enter the compass direction that the device is facing. 0 is due north.

  • Label: Enter a descriptive name for the device.

  • Save: Click to save your device location.

Network

IPv4

Assign IPv4 automatically: Select to let the network router assign an IP address to the device automatically. We recommend automatic IP (DHCP) for most networks.

IP address: Enter a unique IP address for the device. Static IP addresses can be assigned at random within isolated networks, provided that each address is unique. To avoid conflicts, we recommend you contact your network administrator before you assign a static IP address.

Subnet mask: Enter the subnet mask to define what addresses are inside the local area network. Any address outside the local area network goes through the router.

Router: Enter the IP address of the default router (gateway) used to connect devices that are attached to different networks and network segments.

Fallback to static IP address if DHCP isn’t available: Select if you want to add a static IP address to use as fallback if DHCP is unavailable and can’t assign an IP address automatically.

Note

If DHCP isn’t available and the device uses a static address fallback, the static address is configured with a limited scope.

IPv6

Assign IPv6 automatically: Select to turn on IPv6 and to let the network router assign an IP address to the device automatically.

Hostname

Assign hostname automatically: Select to let the network router assign a hostname to the device automatically.

Hostname: Enter the hostname manually to use as an alternative way of accessing the device. The server report and system log use the hostname. Allowed characters are A–Z, a–z, 0–9 and -.

DNS servers

Assign DNS automatically: Select to let the DHCP server assign search domains and DNS server addresses to the device automatically. We recommend automatic DNS (DHCP) for most networks.

Search domains: When you use a hostname that is not fully qualified, click Add search domain and enter a domain in which to search for the hostname the device uses.

DNS servers: Click Add DNS server and enter the IP address of the DNS server. This provides the translation of hostnames to IP addresses on your network.

Network discovery protocols

Bonjour®: Turn on to allow automatic discovery on the network.

Bonjour name: Enter a friendly name to be visible on the network. The default name is the device name and MAC address.

UPnP®: Turn on to allow automatic discovery on the network.

UPnP name: Enter a friendly name to be visible on the network. The default name is the device name and MAC address.

WS-Discovery: Turn on to allow automatic discovery on the network.

One-click cloud connection

One-click cloud connection (O3C) together with an O3C service provides easy and secure internet access to live and recorded video from any location. For more information, see axis.com/end-to-end-solutions/hosted-services.

Allow O3C:

  • One-click: This is the default setting. Press and hold the control button on the device to connect to an O3C service over the internet. You need to register the device with the O3C service within 24 hours after you press the control button. Otherwise, the device disconnects from the O3C service. Once you register the device, Always is enabled and the device stays connected to the O3C service.

  • Always: The device constantly attempts to connect to an O3C service over the internet. Once you register the device, it stays connected to the O3C service. Use this option if the control button on the device is out of reach.

  • No: Disables the O3C service.

Proxy settings: If needed, enter the proxy settings to connect to the proxy server.

Host: Enter the proxy server’s address.

Port: Enter the port number used for access.

Login and Password: If needed, enter username and password for the proxy server.

Authentication method:

  • Basic: This method is the most compatible authentication scheme for HTTP. It’s less secure than the Digest method because it sends the username and password unencrypted to the server.

  • Digest: This method is more secure because it always transfers the password encrypted across the network.

  • Auto: This option lets the device select the authentication method depending on the supported methods. It prioritizes the Digest method over the Basic method.

Owner authentication key (OAK): Click Get key to fetch the owner authentication key. This is only possible if the device is connected to the internet without a firewall or proxy.

Power over Ethernet

Allocated power: Number of watts (W) that are currently allocated.

Total PoE consumption: Number of watts (W) that are consumed.

Keep PoE active during recorder restart: Turn on to supply power to connected devices during a restart of the recorder.

Used space: Percentage of space used.

Free space: Percentage of space available for recordings.

Free space: Available disk space displayed in megabytes (MB), gigabytes (GB), or terabytes (TB).

Disk status: Current status of the disk.

Disk temperature: Current running temperature.

PoE: Turn on or off PoE for each port. When a device is connected, you’ll see the following information:

  • Friendly name: The friendly name is set in Network settings. The default name is a combination of the model and the media access control address (MAC address) of the connected device.

  • Power consumption: Number of watts (W) that are currently consumed and allocated.

Security

Certificates

Certificates are used to authenticate devices on a network. The device supports two types of certificates:

  • Client/server certificates

    A client/server certificate validates the device’s identity, and can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained.

  • CA certificates

    You can use a CA certificate to authenticate a peer certificate, for example to validate the identity of an authentication server when the device connects to a network protected by IEEE 802.1X. The device has several pre-installed CA certificates.

These formats are supported:

  • Certificate formats: .PEM, .CER, and .PFX

  • Private key formats: PKCS#1 and PKCS#12

Important

If you reset the device to factory default, all certificates are deleted. Any pre-installed CA certificates are reinstalled.

Add certificate : Click to add a certificate.

  • More: Show more fields to fill in or select.

  • Secure keystore: Select to use Secure element or Trusted Platform Module 2.0 to securely store the private key. For more information on which secure keystore to select, go to help.axis.com/en-us/axis-os#cryptographic-support.

  • Key type: Select the default or a different encryption algorithm from the drop-down list to protect the certificate.

The context menu contains:

  • Certificate information: View an installed certificate’s properties.

  • Delete certificate: Delete the certificate.

  • Create certificate signing request: Create a certificate signing request to send to a registration authority to apply for a digital identity certificate.

Secure keystore:

  • Secure element (CC EAL6+): Select to use secure element for secure keystore.

  • Trusted Platform Module 2.0 (CC EAL4+, FIPS 140-2 Level 2): Select to use TPM 2.0 for secure keystore.

IEEE 802.1x and IEEE 802.1AE MACsec

IEEE 802.1x is an IEEE standard for port-based network admission control providing secure authentication of wired and wireless network devices. IEEE 802.1x is based on EAP (Extensible Authentication Protocol).

To access a network protected by IEEE 802.1x, network devices must authenticate themselves. The authentication is performed by an authentication server, typically a RADIUS server (for example, FreeRADIUS and Microsoft Internet Authentication Server).

Certificates

When configured without a CA certificate, server certificate validation is disabled and the device tries to authenticate itself regardless of what network it is connected to.

When using a certificate, in Axis' implementation, the device and the authentication server authenticate themselves with digital certificates using EAP-TLS (Extensible Authentication Protocol - Transport Layer Security).

To allow the device to access a network protected through certificates, you must install a signed client certificate on the device.

Authentication method: Select an EAP type used for authentication. The default option is EAP-TLS. EAP-PEAP/MSCHAPv2 is a more secure option.

Client certificate: Select a client certificate to use IEEE 802.1x. The authentication server uses the certificate to validate the client’s identity.

CA certificate: Select CA certificates to validate the authentication server’s identity. When no certificate is selected, the device tries to authenticate itself regardless of what network it is connected to.

EAP identity: Enter the user identity associated with the client certificate.

EAPOL version: Select the EAPOL version that is used in the network switch.

Use IEEE 802.1x: Select to use the IEEE 802.1x protocol.

IEEE 802.1AE MACsec

IEEE 802.1AE MACsec is an IEEE standard for media access control (MAC) security that defines connectionless data confidentiality and integrity for media access independent protocols.

The settings are only available if you use EAP-TLS as the authentication method:

Mode

  • Dynamic CAK / EAP-TLS: The default option. After a secured connection, the device checks for MACsec on the network.

  • Static CAK / pre-shared key (PSK): Select to set the key name and value to connect to the network.

The settings are only available if you use EAP-PEAP/MSCHAPv2 as the authentication method:

  • Password: Enter the password for your user identity.

  • Peap version: Select the Peap version that is used in the network switch.

  • Label: Select 1 to use client EAP encryption; select 2 to use client PEAP encryption. Select the Label that the network switch uses when using Peap version 1.

Custom signed firmware certificate

To install test firmware or other custom firmware from Axis on the device, you need a custom signed firmware certificate. The certificate verifies that the firmware is approved by both the device owner and Axis. The firmware can only run on a specific device which is identified by its unique serial number and chip ID. Only Axis can create custom signed firmware certificates, since Axis holds the key to sign them.

Install: Click to install the certificate. You need to install the certificate before you install the firmware.

The context menu contains:

  • Delete certificate: Delete the certificate.

Accounts

Accounts

Add account: Click to add a new account. You can add up to 100 accounts.

Account: Enter a unique account name.

New password: Enter a password for the account. Passwords must be 1 to 64 characters long. Only ASCII printable characters (code 32 to 126) are allowed in the password, for example, letters, numbers, punctuation, and some symbols.

Repeat password: Enter the same password again.

Privileges:

  • Administrator: Has full access to all settings. Administrators can also add, update, and remove other accounts.

  • Operator: Has access to all settings except:

    • All System settings.

    • Adding apps.

  • Viewer: Has access to:

    • Watch and take snapshots of a video stream.

    • Watch and export recordings.

    • Pan, tilt, and zoom; with PTZ user access.

The context menu contains:

Update account: Edit the account properties.

Delete account: Delete the account. You can’t delete the root account.

SSH accounts

Add SSH account: Click to add a new SSH account.

  • Restrict root access: Turn on to restrict functionality that requires root access.

  • Enable SSH: Turn on to use SSH service.

Account: Enter a unique account name.

New password: Enter a password for the account. Passwords must be 1 to 64 characters long. Only ASCII printable characters (code 32 to 126) are allowed in the password, for example, letters, numbers, punctuation, and some symbols.

Repeat password: Enter the same password again.

Comment: Enter a comment (optional).

The context menu contains:

Update SSH account: Edit the account properties.

Delete SSH account: Delete the account. You can’t delete the root account.

OpenID Configuration

Important

Enter the right values to ensure you can log in to the device again.

Client ID: Enter the OpenID username.

Outgoing Proxy: Enter the proxy address for the OpenID connection to use a proxy server.

Admin claim: Enter a value for the admin role.

Provider URL: Enter the web link for the API endpoint authentication. Format should be https://[insert URL]/.well-known/openid-configuration

Operator claim: Enter a value for the operator role.

Require claim: Enter the data that should be in the token.

Viewer claim: Enter the value for the viewer role.

Remote user: Enter a value to identify remote users. This will help to display the current user in the device’s web interface.

Scopes: Optional scopes that could be part of the token.

Client secret: Enter the OpenID password

Save: Click to save the OpenID values.

Enable OpenID: Turn on to close current connection and allow device authentication from the provider URL.

Storage

Onboard storage

  • Hard drive
  • Free: The amount of free disk space.

  • Status: If the disk is mounted or not.

  • File system: The file system used by the disk.

  • Encrypted: If the disk is encrypted or not.

  • Temperature: The current temperature of the hardware.

  • Overall heath test: The result after checking the health of the disk.

  • Tools
  • Check: Check the storage device for errors and tries to repair it automatically.

  • Repair: Repair the storage device. Active recordings will pause during the repair. Repairing a storage device may result in lost data.

  • Format: Erase all recordings and format the storage device. Choose a file system.

  • Encrypt: Encrypt stored data.

  • Decrypt: Decrypt stored data. The system will erase all files on the storage device.

  • Change password: Change the password for the disk encryption. Changing the password doesn't disrupt ongoing recordings.

  • Use tool: Click to run the selected tool

Unmount: Click before you disconnect the device from the system. This will stop all ongoing recordings.

Write protect: Turn on to protect the storage device from being overwritten.

Autoformat: The disk will automatically format using the ext4 file system.

Logs

Reports and logs

Reports

  • View the device server report: View information about the product status in a pop-up window. The Access Log is automatically included in the Server Report.

  • Download the device server report: It creates a .zip file that contains a complete server report text file in UTF–8 format, as well as a snapshot of the current live view image. Always include the server report .zip file when you contact support.

  • Download the crash report: Download an archive with detailed information about the server's status. The crash report contains information that is in the server report as well as detailed debug information. This report might contain sensitive information such as network traces. It can take several minutes to generate the report.

Logs

  • View the system log: Click to show information about system events such as device startup, warnings, and critical messages.

  • View the access log: Click to show all failed attempts to access the device, for example, when a wrong login password is used.

Network trace

Important

A network trace file might contain sensitive information, for example certificates or passwords.

A network trace file can help you troubleshoot problems by recording activity on the network.

Trace time: Select the duration of the trace in seconds or minutes, and click Download.

Remote system log

Syslog is a standard for message logging. It allows separation of the software that generates messages, the system that stores them, and the software that reports and analyzes them. Each message is labeled with a facility code, which indicates the software type generating the message, and assigned a severity level.

Server: Click to add a new server.

Host: Enter the hostname or IP address of the server.

Format: Select which syslog message format to use.

  • Axis

  • RFC 3164

  • RFC 5424

Protocol: Select the protocol to use:

  • UDP (Default port is 514)

  • TCP (Default port is 601)

  • TLS (Default port is 6514)

Port: Edit the port number to use a different port.

Severity: Select which messages to send when triggered.

CA certificate set: See the current settings or add a certificate.

Maintenance

Restart: Restart the device. This does not affect any of the current settings. Running applications restart automatically.

Restore: Return most settings to the factory default values. Afterwards you must reconfigure the device and apps, reinstall any apps that didn’t come preinstalled, and recreate any events and presets.

Important

The only settings saved after restore are:

  • Boot protocol (DHCP or static)
  • Static IP address
  • Default router
  • Subnet mask
  • 802.1X settings
  • O3C settings

Factory default: Return all settings to the factory default values. Afterwards you must reset the IP address to make the device accessible.

Note

All Axis device firmware is digitally signed to ensure that you only install verified firmware on your device. This further increases the overall minimum cybersecurity level of Axis devices. For more information, see the white paper “Signed firmware, secure boot, and security of private keys” at axis.com.

Firmware upgrade: Upgrade to a new firmware version. New firmware releases can contain improved functionality, bug fixes, and completely new features. We recommend you to always use the latest release. To download the latest release, go to axis.com/support.

  • When you upgrade, you can choose between three options:
  • Standard upgrade: Upgrade to the new firmware version.

  • Factory default: Upgrade and return all settings to the factory default values. When you choose this option, you can’t revert to the previous firmware version after the upgrade.

  • Autorollback: Upgrade and confirm the upgrade within the set time. If you don’t confirm, the device reverts to the previous firmware version.

Firmware rollback: Revert to the previously installed firmware version.

Configure your device

Allocate power

The recorder reserves a certain amount of power for each port. The total reserved power cannot exceed the total power budget. A port will not be powered up if the recorder tries to reserve more power than what is available. This makes sure that all of the connected devices will be powered.

  • PoE power can be allocated to the connected devices in the following ways:
  • PoE class — Each port automatically determines the amount of power to reserve according to the PoE class of the connected device.

  • LLDP — Each port determines the amount of power to reserve by exchanging PoE information using the LLDP protocol.

  • Note

    Power allocation with LLDP only works for supported devices with firmware 9.80 or later, and for AXIS S3008 Recorder with firmware 10.2 or later.

LLDP is always active in AXIS S3008 Recorder but must be activated on the connected device. If LLDP is turned off or not supported in the connected device, then PoE class reservation will be used instead.

  1. To turn on LLDP on your PoE device:
  2. Open the device webpage.

  3. Go to Settings > System > Plain config > Network.

  4. Under LLDP POE, select the LLDP Send Max PoE checkbox.

Example

In this example, the AXIS S3008 Recorder has a total power budget of 65 W.

PoE class 2 device. Requests 7 W power but actually consumes 5 W power.

PoE class 3 device. Requests 15.5 W power but actually consumes 7.5 W power.

Reserved power.

Actual power consumption.

Allocate power by PoE class

Reserved powerActual power consumption
  • Each port reserves the amount of power according to the device’s PoE class.

  • The recorder can power 2 PoE class 3 devices and 4 PoE class 2 devices.

  • The total power reserved is (2 x 15.5) + (4 x 7) =59 W.

  • The actual power consumed is (2 x 7.5) + (4 x 5) = 35 W.

Allocate power by LLDP

Note

The power allocation via LLDP will over-provision for a worst-case power loss that will happen over the network cable.

PoE Class123

Max power camera

3.84

6.49

12.95

Worst case power loss cable

0.14

0.41

1.92

Power needed at recorder

3.98

6.90

14.87

Max power for class

4.00

7.00

15.40

Power reserved at recorder

4 W

7 W

15.5 W

Reserved powerActual power consumption
  • Max power determined by the connected device.

  • Each port reserves the amount of power according to the device’s Max PoE power consumption.

  • The recorder can power up to 8 devices, if their max power requirements remain within the limits.

  • The total power reserved by 8 PoE class 3 devices with LLDP is (8 x 7.5) = 60 W.

  • The actual power consumed by 8 PoE class 3 devices with LLDP is (8 x 7) = 56 W.

  • In this way, a tighter PoE budget allocation allows for more connected devices.

Product overview

  1. USB port
  2. Status LED
  3. Power button
  4. Hard drive LED
  5. Alarm buzzer
  6. Hard drive
  7. Grounding
  8. Control button
  9. LAN port
  10. PoE port (8x)
  11. Power input

Power button

  • To shut down the recorder, long press the power button until the buzzer makes a brief sound.

  • To silence the buzzer, short press the power button.

Control button

  • The control button is used for:
  • Resetting the product to factory default settings. See Hard reset a recorder.

  • Connecting to a one-click cloud connection (O3C) service over the internet. To connect, press and hold the button for about 3 seconds until the status LED flashes green.

Troubleshooting

The status LED gives you the following information:

Status LEDIndication
GreenThe recorder is on and the status is ok.
OrangeThe recorder is starting up, or the firmware is upgrading. Wait until the LED turns green.
Red

This can mean that the PoE budget is exceeded. If you just connected a device to the recorder, try to remove it again. For more information about PoE limitations, see How much power can the recorder supply to the cameras?.

The hard drive LED gives you the following information:

Hard drive LEDIndication
GreenThe LED is flashing green when data is written to the hard drive.
RedA recording disruption has occurred. Go to System > Storage for more information.

The buzzer sounds for this reason:

The recorder shuts down:

  • The recorder is severely overheated.

Technical issues, clues and solutions

IssueSolution

My recordings are not available.

Go to Fix common issues.

I cannot connect to my cameras.

Go to Fix common issues.

I receive error notification: “No contact”.

Go to Fix common issues.

My sites do not appear in my mobile app.

Make sure you have version 4 of the AXIS Companion mobile app.

Fix common issues

Before you restart, configure or reset your devices, we recommend that you to save a system report.

See Save a system report.

  1. Check that your cameras and recorder have power.

  2. Check that you are connected to the internet.

  3. Check that the network is working.

  4. Check that the cameras are connected to the same network as the computer, unless you are remote.

  5. Still not working?
  6. Make sure that your cameras, recorder and AXIS Companion desktop app have the latest firmware and software updates.

    See Upgrade firmware.

  7. Restart the AXIS Companion desktop app.

  8. Restart you cameras and recorder.

  9. Still not working?
  10. Make a hard reset on the cameras and the recorder, to completely put them back to factory default settings.

    See Hard reset a recorder.

  11. Add the reset cameras to your site again.

  12. Still not working?
  13. Update your graphics card with the latest drivers.

  14. Still not working?
  15. Save a system report and contact Axis technical support.

    See Save a system report.

Upgrade firmware

New firmware updates bring you to the latest and improved set of features, functions, and security enhancements.

  1. Go to the leader device’s web interface.

  2. Go to Maintenance > Firmware upgrade and click Upgrade.

  3. Follow the instructions on the screen.

Hard reset a recorder

Important

Move the recorder carefully while it’s switched on. Sudden moves or shocks may damage the hard drive.

Note
  • A hard reset will reset all the settings, including the IP address.
  • A hard reset will not remove your recordings.
  1. Switch off the recorder:

    Press the power button on the front of the recorder for 4-5 seconds until you hear a beep.

  2. Wait until the recorder is switched off, then turn it over to access the control button.

  3. Press and hold the control button. Press and release the power button to start the recorder. Release the control button after 15-30 seconds when the LED indicator flashes amber.

  4. Carefully put the recorder back in its place.

  5. The process is complete when the status LED indicator turns green. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90

  6. Reset your devices connected to the recorder.

  7. If your hard drive is encrypted, it must be mounted manually after the recorder is reset:

    1. Go to the device’s web interface.

    2. Go to System > Storage and click Mount.

    3. Enter the encryption password used when encrypting the hard drive.

I can't log in to the product's web interface

If you set a password for the product during configuration, and later add that product to a site, you can no longer log in to the product's web interface with the password you've set. This is because AXIS Companion software changes the passwords of all devices in the site.

To log in to a device in your site, type the username root and your site password.

How to erase all recordings

  1. In the device’s web interface, go to System > Storage.

  2. Select Format and click Use tool.

  3. Note

    This procedure erases all recordings from the hard drive, but the configuration of the recorder and the site doesn’t change.

Save a system report

  1. In AXIS Companion, go to > Save system report.

  2. When you register a new case at Axis Helpdesk, attach the system report.

Need more help?

Contact support

If you need more help, go to axis.com/support.