AXIS Companion Dome WV

The HDMI connector can be connected to a public view monitor. The monitor can be used for live viewing only. The HDMI connector is not activated by default, see How to activate the HDMI connector

AXIS Companion is a complete end-to-end surveillance solution designed to meet the requirements of small systems with basic surveillance requirements.

An AXIS Companion solution can consist of:

• AXIS Companion cameras, Axis IP cameras and encoders with firmware 8.40 or higher.

• AXIS Companion recorders.

• Axis system accessories, such as memory cards and switches.

• AXIS Companion software for Windows computers as well as mobile devices and TV streaming devices (iOS and Android).

For video tutorials and web apps, visit axis.com/products/axis-companion/how-it-works

• OS: Windows 10 64–bit

• CPU: Intel Core i5

• RAM: 4 GB

• Graphics card: 256 MB onboard video memory

• Graphics card driver: Always use the latest version

• Network: 100 Mbps

• Internet access is required during system setup and management (live and recorded video available offline)

• Uninterruptible Power Supply (UPS)

• Mobile devices: iOS 14 or Android 8.1

1. Note

   Internet access is required during the system setup.

2. Installation overview:

3. Register a MyAxis account

4. Install the hardware

5. Install the desktop app

6. Create a site

7. Install the mobile app

Result of system installation:

• The firmware is upgraded on all Axis devices.

• A password is set for the devices.

• The recordings are enabled with default settings.

• The remote access is enabled.

Register a MyAxis account at axis.com/my-axis/login.

You can make your MyAxis account more secure by activating multi-factor authentication (MFA). MFA is a security system that adds another layer of verification to ensure the user’s identity.

1. Activate MFA:

2. Log in with your MyAxis credentials.

3. Go to MyAxis and select Account settings in the drop-down menu.

4. Turn on 2–Step verification.

5. You are redirected to a login page.

6. Log in with your MyAxis credentials.

7. MFA is now active.

1. Log in when MFA is active:

2. Log in to your MyAxis account.

3. An email is sent to you.

4. Open the email and click Authenticate.

5. If you didn’t receive an email, then check if it’s in your spam folder. If it’s not there, then contact IT support.

1. Install your camera hardware.

2. Connect the recorder to your network via the LAN port.

3. Note

   If you have no recorder, then you need a camera with an SD card if you want to be able to record video.

4. Connect the cameras to the recorder’s integrated PoE switch or an external PoE switch.

5. Connect the computer to the same network as the recorder.

6. Connect the power supply to the recorder.

7. Important

   You must first connect the power cord to the recorder, and then connect the power cord to the power outlet.

8. Wait a few minutes for the recorder and cameras to boot up before proceeding.

1. Go to axis.com/products/axis-companion and click Download to download the AXIS Companion desktop app for Windows.

2. Sign in using your MyAxis account.

3. Read the license agreement, and select one of the alternatives to proceed.

4. Save the file to a location of your choice.

5. Open the file, and click Run to start the installation.

6. If you want to allow the app to make changes on your device, click Yes.

7. Select language and click OK.

8. Follow the setup wizard.

A site is a single point of entry to a surveillance solution, for example all cameras in a store. You can keep track of several sites through a single MyAxis account.

1. Start the AXIS Companion desktop app.

2. Sign in with your MyAxis account.

3. Click Get started.

4. Name your site and enter your company name.

5. Click Next.

6. Select the devices you want to add to your site.

   If any devices are password-protected, then you must enter the password for them before they can be selected.

7. Note

   If you have devices that are not supported, then you can click Read more to find our why they are not supported.

8. Click Next.

9. Enter a password.

   This password is used for accessing the device webpages or offline mode in the AXIS Companion mobile app.

10. Click Next.

11. On the Ready to install page, there might be a list of cameras that need to be restored. If so, click the Restore device link to fix the issue on the device webpage.

12. Click Finish and wait while AXIS Companion configures the cameras.

13. Note

    The configuration may take several minutes.

For getting-started video tutorials, see AXIS Companion tutorials.

You can use the AXIS Companion mobile app to set up your system and control it from anywhere. Real-time alert notifications keep you aware of any suspicious activity. You can also view and export video recordings.

1. Go to your App store or Google play.

2. Search for AXIS Companion 4 and download the app.

3. Open the AXIS Companion app and log in with your Axis credentials.

   If you don’t have an Axis account, you can go to axis.com/my-axis to register a new account.

To find out more on how to use the app, see AXIS Companion tutorials.

1. Press and very quickly release the WLAN pairing button on the camera.

2. Press the WLAN pairing button on the wireless access point within 120 seconds from pushing the button on the camera.

3. Make sure the LED indicator shows steady green for 10 seconds, this means that the camera is connected.

4. Add the camera to your site, see Add cameras to your site.

If the wireless access point does not support push-button configuration, you have to configure the wireless network manually, see Configure the wireless network manually.

1. Use a network cable to connect the camera to the network.

2. Make sure the access point is up and running.

3. Add the camera to your site, see Add cameras to your site.

4. Go to and Camera properties and log in to the product’s webpage.

5. Go to Settings > System > Wireless.

6. In the list, select the wireless network or go to Add another network and add it manually with the SSID.

7. Enter the password for the access point.

8. Click Save.

9. Disconnect the network cable from the camera.

10. Make sure the LED indicator shows steady green for 10 seconds, this means that the camera is connected.

11. In AXIS Companion, check that you can access the camera.

1. Go to and Camera properties and log in to the product´s webpage.

2. Go to Settings > System > Maintenance.

3. Select Default and wait for the camera to restart.

4. Go through the initial setup dialogue.

5. In the drop-down menu Select a Capture Mode, select 1080p (HDMI).

6. Go back to Axis Companion client.

7. Go to and remove the camera, see Remove a camera from your site.

8. Add the camera again, see Add cameras to your site.

1. If the HDMI connector is not activated, see How to activate the HDMI connector.

2. Connect the public view monitor to the HDMI connector.

3. Enable mirroring under Settings > Stream.

1. Sign in to AXIS Companion on a computer or a mobile device using your MyAxis account.

2. Enter the site that contains your cameras.

Find out more at AXIS Companion tutorials.

1. Go to

2. Select which camera you want to view.

To watch a video of how to zoom, pan and take snapshots, see the AXIS Companion tutorials.

1. Go to

2. Use the timeline and calendar to find the recording.

3. Select the camera in the timeline and move the playback marker to the desired time.

4. Note

   When you move the playback marker, the video image is updated continuously. This makes it easy for you to find a specific moment in the recording.

5. Click Play.

To watch a video of how to browse and play recordings, see the AXIS Companion tutorials.

1. Go to >

2. Select start and end times for a camera recording.

3. Select which cameras to save recordings from.

4. To save to a USB drive on an AXIS S3008 Recorder, select the Save to recorder USB checkbox.

5. Note

   The first partition of your USB device must use an exFAT or NTFS file system.

6. Save the recording.

To watch a video of how to save recordings, see the AXIS Companion tutorials.

To play a saved recording, open it with AXIS File Player.

When you save a recording, the AXIS File Player will be saved in the same folder. The AXIS File Player has a timeline showing what time the recording was made.

You can validate a recording to confirm that the timestamp and images have not been manipulated after the recording was first saved. For this purpose, a digital signature will be included in the file when you save a recording. You can add a password to the digital signature for increased security.

1. Protect your digital signature with a password:

2. In AXIS Companion, go to > Customize.

3. Under Recordings, select Show digital signature options when saving recordings.

   When saving a recording now, the Digital signature window will appear, allowing you to choose a password for the signature.

Validate a recording:

1. Open the saved recording with AXIS File Player.

2. Click Tools and select Verify digital signature.

3. Enter password, if a password was applied to the signature, and click OK.

   A window appears to inform whether or not the recording is valid.

• Take a snapshot from live view:

• Click

1. Take a snapshot from recordings:

2. Use the timeline and calendar to find the recording.

3. Select the camera in the timeline and move the playback marker to the desired time.

4. Click to start investigation mode.

5. • Investigation mode allows you to step through the recorded video, frame by frame, to find the exact moment when an incident happened and take a snapshot from that moment.

6. To find the incident, click on the thumbnails to step 30, 15, 5 or 1 frames backward (top panel) or forward (bottom panel). You can also move the slider.

7. When satisfied, click to take a snapshot.

8. • For most cameras the snapshot will contain the entire camera image, regardless of the zoom level. For cameras with a dewarped image, the snapshot will be the zoomed-in image.

1. Change the folder where snapshots are saved:

2. Go to > Customize.

3. Change the settings under Snapshots.

1. Go to > Cameras.

2. Click > Image settings for the camera you want to adjust.

3. You can control the image by adjusting settings like:

• Appearance

• Exposure

• Overlay

• Day & Night

• Privacy mask

• Focus & zoom

You can configure the video quality to suit your image quality requirements and bandwidth usage. Video quality settings affect motion recording, continuous recording and live view.

1. Go to > Cameras.

2. Right-click the camera you want to configure and select Video Quality Settings.

3. Edit the profile settings for:

4. • High (resolutions with an image width above 640 pixles)

   • Low (resolutions with an image width up to 1920 pixles)

   • Note

     High resolutions for the Low setting may affect the performance of scrubbing when you view recordings.

5. Click OK to save.

Recording only when motion is detected saves considerably on disk space and bandwidth, compared to continuous recording.

If the motion detection is triggered too often, you can adjust the settings to ignore parts of the view or certain types of events.

1. In AXIS Companion, go to > Cameras.

2. Make sure the camera is enabled in the Motion detection column.

3. Click for a camera and select Motion recording....

4. In the Motion recording dialog, click Settings....

5. Choose what part of the camera view to include in the motion detection:

6. • Edit the dark area to be included for motion detection.

   • To draw an area that will be excluded from motion detection, select Exclude area and edit the light area.

   • Note

     For some camera models you can only draw squares, and for others you can draw more complex polygons.

7. Expand Advanced to adjust the settings of the filters.

8. • Small objects filter — Ignore objects that are small, such as animals.

   • Swaying objects filter — Ignore objects that only move within a short distance, such as trees or flags that move when it is windy.

   • Note

     The swaying objects filer is not available for all camera models.

   • Short-lived objects filter — Ignore objects that only appear for a short period of time, such as light beams from passing cars or fast-moving shadows.

9. Click OK twice.

You can make AXIS Companion send a notification to your mobile app when certain types of motion occur in a camera view.

• The motion triggers are based on the following ACAPs:

• AXIS Video Motion Detection

• AXIS Fence Guard

1. Worflow:

2. Make sure the ACAP is activated in your device.

3. In AXIS Companion, go to > Events and select an ACAP.

4. Configure a schedule for when you want to receive notifications.

5. Under Activation, select the cameras you want notifications from.

Receiving notifications on your mobile device:

• Push notifications are sent to your mobile app if you are logged in to your MyAxis account on your mobile.

• When you install the AXIS Companion 4 mobile app, you must accept when prompted with a question if you want to receive notifications. If you want to deactivate the notifications later on, go to the settings of your mobile device, select the AXIS Companion 4 app, and disable the notifications.

1. To turn notifications on or off in the mobile app:

2. Go to > Notifications.

3. Turn Motion detection on or off.

When a notification is sent, it will appear as a popup message on your mobile device. Tap the message to open the playback of the ongoing event.

1. Go to > Users.

2. Click Add....

3. Enter an email address and select an access level, then click OK.

4. 
   The following access levels are available:

5. Administrator	Full access
   Operator	Can access recordings and live view, but can’t make any changes to the site
   Viewer	Can only access live view

If you are running AXIS Companion while there is no connection to the internet, then you can enter offline mode. This makes Live view and Recordings available locally. However, you will not be able to access the Configuration menu while the internet connection is down.

• Activate offline mode:

• Click > Site and turn on Offline mode.

• What you need:

• An Apple TV or Android TV device.

• The AXIS Companion 4 app installed on your mobile device.

• The AXIS Companion TV app installed from the app store on your Apple TV or Android TV device.

• Your cameras, mobile app and TV app must all be connected to the same local network.

• AppleTV 4 and Nvidia Shield with Android 6 or later.

1. This is how you do it:

2. Open the AXIS Companion 4 mobile app and log in.

3. Go to Devices > and select your external display.

4. Note

   It may take a few seconds before the icon appears.

5. Select the cameras you want to show on your external display.

6. Tap and wait for the configuration to complete.

7. You can view a single camera at a time or create a split view with up to 16 cameras.

8. When the AXIS Companion 4 TV app opens, read the instructions on the screen about how to navigate in the app.

Use corridor format to better utilize the full field of view in a long and narrow space, for example a staircase, hallway, road, or tunnel.

1. Adjust the camera or its lens to a vertical field of view.

2. In AXIS Companion, go to > Cameras.

3. On the row of the camera you want to adjust, click > Image settings.

4. On the Appearance tab, select a suitable angle for Orientation.

5. Click Close.

You can connect a door station to both your AXIS Companion desktop app as well as the mobile app. This makes it possible for you to answer calls, unlock a door and view a door station video with your mobile device.

1. In the AXIS Companion desktop app, go to > Cameras.

2. Click Add devices and add the door station.

   You can now answer the door station with your AXIS Companion desktop app.

1. Connect your desktop app to a door station.

2. Start the AXIS Companion 4 mobile app.

3. Log in to the same MyAxis account as you used for the desktop app.

   You can now answer the door station with your AXIS Companion 4 mobile app.

1. Give other users access to the door station:

2. From the AXIS Companion desktop app, go to > Users.

3. Invite the user to the site.

1. Turn off calls from the door station:

2. In the AXIS Companion 4 mobile app, go to User.

3. Go to Notifications and turn off Door station calls.

1. Connect the cameras to the recorders integrated PoE switch or an external PoE switch.

2. Go to > Cameras.

3. Click Add devices.

4. Select the devices you want to add to your site.

   If any devices are password-protected, then you must enter the password for them before they can be selected.

5. Note

   If you have devices that are not supported, then you can click Read more to find our why they are not supported.

6. Click Next.

7. Enter a password.

   This password is used for accessing the device webpages or offline mode in the AXIS Companion mobile app.

8. Click Next.

9. On the Ready to install page, there might be a list of cameras that need to be restored. If so, click the Restore device link to fix the issue on the device webpage.

10. Click Finish and wait while AXIS Companion configures the cameras.

11. Note

    The configuration may take several minutes.

1. Go to > Cameras.

2. On the row of the camera you want to remove, click > Remove.

3. If the camera has ongoing recordings, select Stop motion and continuous recording to stop recordings.

4. Click OK.

For SD card recommendations, see axiscompanion.com.

• The control button is used for:

• Resetting the product to factory default settings. See Hard reset a camera or Hard reset a recorder

Before you restart, configure or reset your devices, we recommend that you to save a system report.

See Save a system report.

1. Check that your cameras and recorder have power.

2. Check that you are connected to the internet.

3. Check that the network is working.

4. Check that the cameras are connected to the same network as the computer, unless you are remote.

5. Still not working?

6. Make sure that your cameras, recorder and AXIS Companion desktop app have the latest firmware and software updates.

   See Upgrade firmware.

7. Restart the AXIS Companion desktop app.

8. Restart you cameras and recorder.

9. Still not working?

10. Make a hard reset on the cameras and the recorder, to completely put them back to factory default settings.

    See Hard reset a camera.

    See Hard reset a recorder.

11. Add the reset cameras to your site again.

12. Still not working?

13. Update your graphics card with the latest drivers.

14. Still not working?

15. Save a system report and contact Axis technical support.

    See Save a system report.

New firmware updates bring you to the latest and improved set of features, functions, and security enhancements.

1. Go to the leader device webpage.

2. Go to System > Maintenance and click Upgrade under Firmware upgrade.

3. Follow the instructions on the screen.

1. Select the camera you want to hard reset and remove it from the site.

   See Remove a camera from your site.

2. Disconnect the power from the device.

3. Press and hold the control button on the device, and then reconnect the power.

   Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber.

4. Release the control button.

   The process is complete when the status LED indicator turns green.

   The product has now been reset to the factory default settings.

5. Add the camera to the site again, see Add cameras to your site.

1. Switch off the recorder:

   Press the power button on the front of the recorder for 4-5 seconds until you hear a beep.

2. Wait until the recorder is switched off, then turn it over to access the control button.

3. Press and hold the control button. Press and release the power button to start the recorder. Release the control button after 15-30 seconds when the LED indicator flashes amber.

4. Slowly put the recorder back in its place.

5. The process is complete when the status LED indicator turns green. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90

6. Reset your cameras connected to the recorder.

   See Hard reset a camera.

7. If your hard drive is encrypted, then it must be mounted manually after the recorder is reset:

8. 1. Go to the device webpage.

   2. Go to System > Storage and click Mount.

   3. Enter the encryption password used when encrypting the hard drive.

1. In AXIS Companion, go to > Save system report.

2. When you register a new case at Axis Helpdesk, attach the system report.