AXIS M3106-LVE Mk II Network Camera

You can access the built-in help from the device’s webpage. The help provides more detailed information on the device’s features and their settings.

To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support.

For more information about how to find and assign IP addresses, go to How to assign an IP address and access your device.

1. Open a browser and enter the IP address or host name of the Axis device.

   If you do not know the IP address, use AXIS IP Utility or AXIS Device Manager to find the device on the network.

2. Enter the username and password. If you access the device for the first time, you must set the root password. See .

3. The live view page opens in your browser.

The device password is the primary protection for your data and services. Axis devices do not impose a password policy as they may be used in various types of installations.

To protect your data we strongly recommend that you:

• Use a password with at least 8 characters, preferably created by a password generator.

• Don’t expose the password.

• Change the password at a recurring interval, at least once a year.

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

The AVHS settings are configured under System Options > Network > TCP IP > Basic. The possibility to connect to an AVHS service is enabled by default. To disable, clear the Enable AVHS box.

One-click enabled

Press and hold the product’s control button (see Product overview) for about 3 seconds to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

Always

The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered, the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient or possible to use the one-click installation.

A capture mode is a preset configuration that defines how the camera will capture images. The capture mode setting can affect the camera’s field of view and aspect ratio. The shutter speed can also be affected, which in turn will affect the light sensitivity.

The lower resolution capture mode may be sampled from the original resolution, or it may be cropped out from the original, in which case the field of view may also be affected.

The capture mode to choose depends on the requirements for the frame rate and resolution for the specific surveillance setup. For specifications about available capture modes, see the product’s datasheet at axis.com.

• Which capture mode to choose depends on the requirements of frame rate and resolution for the specific surveillance setup. For specifications about available capture modes, see the product’s datasheet. To find the latest version of the datasheet, go to axis.com.

1. Stream profiles can be used for example when creating events for recording video streams.

2. Click Settings and Stream.

3. Under General, click Stream profiles.

4. Now you can edit an existing stream profile, or create a new one.

Decide which compression method to use based on your viewing requirements, and on the properties of your network. The available options are:

Motion JPEG

Motion JPEG, or MJPEG, is a digital video sequence that is made up of a series of individual JPEG images. These images are then displayed and updated at a rate sufficient to create a stream that shows constantly updated motion. For the viewer to perceive motion video the rate must be at least 16 image frames per second. Full motion video is perceived at 30 (NTSC) or 25 (PAL) frames per second.

The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every image contained in the stream.

H.264 or MPEG-4 Part 10/AVC

H.264 can, without compromising image quality, reduce the size of a digital video file by more than 80% compared to the Motion JPEG format and by as much as 50% compared to older MPEG formats. This means that less network bandwidth and storage space are required for a video file. Or seen another way, higher video quality can be achieved for a given bitrate.

H.265 or MPEG-H Part 2/HEVC

H.265 can, without compromising image quality, reduce the size of a digital video file by more than 25% compared to H.264.

1. Go to live view and select H.264.

2. Go to Settings > Stream.

3. Do one or more of the following:

4. • Turn on the Zipstream functionality and select the desired level.

   • Note

     The zipstream settings are used for both H.264 and H.265.

   • Turn on dynamic GOP and set a high GOP length value.

   • Increase the compression.

   • Turn on dynamic FPS.

To reduce noise in low-light conditions, you can adjust one or more of the following settings:

• Adjust the trade-off between noise and motion blur. Go to Settings > Image > Exposure and move the Blur-noise trade-off slider toward Low noise.

• Set the exposure mode to automatic.

• Note

  A high max shutter value can result in motion blur.

• To slow down the shutter speed, set max shutter to the highest possible value.

• Reduce sharpness in the image.

• Open the aperture.

There are different exposure mode options in the camera that adjusts aperture, shutter speed, and gain to improve image quality for specific surveillance scenes. Go to Settings > Image > Exposure and select between the following exposure modes:

• For most use cases, select Automatic exposure.

• For environments with certain artificial lighting, for example fluorescent lighting, select Flicker-free.

  Select the same frequency as the power line frequency.

• For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and sun during daytime, select Flicker-reduced.

  Select the same frequency as the power line frequency.

• To lock the current exposure settings, select Hold current.

• Go to Settings > Image > Capture mode and make sure to select the capture mode that has the highest resolution.

• Go to Settings > Stream > General and set the compression as low as possible.

• Go to Live view settings > Video format and select MJPEG streaming.

• Go to Settings > Stream > H.264 encoding and turn off Zipstream functionality.

1. Go to Settings > System > Events to set up a rule. The rule defines when the device will perform certain actions. Rules can be setup as scheduled, recurring, or for example, triggered by motion detection.

2. Select the Condition that must be met to trigger the action. If you specify more than one condition for the rule, all of the conditions must be met to trigger the action.

3. Select which Action the device should perform when the conditions are met.

The Axis product can be configured by users with administrator or operator rights. To open the product’s setup pages, click Setup in the top right-hand corner of the live view window.

• Administrators have unrestricted access to all settings.

• Operators have restricted access to settings, see

See also the online help .

Basic Setup provides shortcuts to the settings that should be made before using the Axis product:

1. Users. See .

2. TCP/IP. See .

3. Date & Time. See .

4. Video Stream. See .

The Basic Setup menu can be disabled from System Options > Security > Users.

1. To store recordings on the network, you need to set up your network storage.

2. Go to Settings > System > Storage.

3. Click Setup under Network storage.

4. Enter the IP address of the host server.

5. Enter the name of the shared location on the host server.

6. Move the switch if the share requires a login, and enter username and password.

7. Click Connect.

1. Turn on audio:

2. Go to Settings > Audio and turn on Allow audio.

3. Go to Input > Type and select your audio source.

4. Edit the stream profile which is used for the recording:

5. Go to Settings > Stream and click Stream profiles.

6. Select the stream profile and click Audio.

7. Select the checkbox and select Include.

8. Click Save.

9. Click Close.

To record video you must first set up network storage, see Set up network storage, or have an SD card installed.

1. Record video

2. Go to the live view.

3. To start a recording, click Record. Click again to stop the recording.

1. Watch video

2. Click Storage > Go to recordings.

3. Select your recording in the list and it will play automatically.

You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions. The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects motion, or show an overlay text while the device is recording.

To learn more, check out our guide Get started with rules for events.

To reset the product to the factory default settings:

1. Disconnect power from the product.

2. Press and hold the control button while reconnecting power. See Product overview.

3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber.

4. Release the control button. The process is complete when the status LED indicator turns green. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90.

5. Use the installation and management software tools to assign an IP address, set the password, and access the video stream.

   The installation and management software tools are available from the support pages on axis.com/support.

It is also possible to reset parameters to factory default through the web interface. Go to Settings > System > Maintenance and click Default.

Firmware is the software that determines the functionality of network devices. One of your first actions when troubleshooting a problem should be to check the current firmware version. The latest version may contain a correction that fixes your particular problem.

To check the current firmware:

1. Go to the product’s webpage.

2. Click the help menu .

3. Click About.

AXIS Device Manager can be used for multiple upgrades. Find out more at axis.com/products/axis-device-manager.

1. Download the firmware file to your computer, available free of charge at axis.com/support/firmware.

2. Log in to the product as an administrator.

3. Go to Settings > System > Maintenance. Follow the instructions on the page. When the upgrade has finished, the product restarts automatically.

If you can’t find what you’re looking for here, try the troubleshooting section at axis.com/support.

When setting up your system, it is important to consider how various settings and situations affect the performance. Some factors affect the amount of bandwidth (the bitrate) required, others can affect the frame rate, and some affect both. If the load on the CPU reaches its maximum, this also affects the frame rate.

The following factors are the most important to consider:

• High image resolution or lower compression levels result in images containing more data which in turn affects the bandwidth.

• Rotating the image in the GUI will increase the product's CPU load.

• Access by large numbers of Motion JPEG or unicast H.264 clients affects the bandwidth.

• Access by large numbers of Motion JPEG or unicast H.265 clients affects the bandwidth.

• Simultaneous viewing of different streams (resolution, compression) by different clients affects both frame rate and bandwidth.

  Use identical streams wherever possible to maintain a high frame rate. Stream profiles can be used to ensure that streams are identical.

• Accessing Motion JPEG and H.264 video streams simultaneously affects both frame rate and bandwidth.

• Accessing Motion JPEG and H.265 video streams simultaneously affects both frame rate and bandwidth.

• Heavy usage of event settings affects the product’s CPU load which in turn affects the frame rate.

• Using HTTPS may reduce frame rate, in particular if streaming Motion JPEG.

• Heavy network utilization due to poor infrastructure affects the bandwidth.

• Viewing on poorly performing client computers lowers perceived performance and affects frame rate.

• Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect the frame rate and the general performance.

This product supports microSD/microSDHC/microSDXC cards.

For SD card recommendations, see axis.com.

microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.

• The control button is used for:

• Resetting the product to factory default settings. See Reset to factory default settings.

RJ45 Ethernet connector with Power over Ethernet (PoE).