AXIS Optimizer for Milestone XProtect®

AXIS Optimizer unlocks Axis features directly in Milestone XProtect or Siemens Siveillance Video. The application optimizes the performance of Axis devices in these video management systems which allows you to save both time and effort when configuring a system or during daily operation. The application is free of charge.

AXIS Optimizer is fully supported on the following platforms:

• Milestone XProtect Express+

• Milestone XProtect Professional+

• Milestone XProtect Expert

• Milestone XProtect Corporate

• Milestone XProtect Essential+

• Siemens Siveillance Video Pro

• Siemens Siveillance Video Advanced

• Siemens Siveillance Video Core Plus

• Siemens Siveillance Video Core

We recommend to use the latest versions of Management Client and Smart Client. The latest version of AXIS Optimizer is always tested and compatible with the latest version of the VMS platform version. For more information, read the Release notes.

In the Compatibility information page you can verify which AXIS Optimizer features are supported by your VMS version.

In Management Client

1. Go to Site Navigation > Basics > AXIS Optimizer.

2. Click Show compatibility info.

In Smart Client

1. Go to Settings > Axis general options.

2. Click Show compatibility info.

AXIS Optimizer is fully supported in federated systems.

AXIS Optimizer is fully supported with interconnected systems.

To see the latest release notes, go to axis.com/ftp/pub_soft/cam_srv/optimizer_milestone/latest/relnote.txt.

1. Make sure you have the correct client version of Milestone XProtect.

2. Log in to your MyAxis account.

3. From axis.com/products/axis-optimizer-for-milestone-xprotect, download AXIS Optimizer to each device that runs Management Client or Smart Client.

4. Run the downloaded file and follow the instructions in the step-by-step guide.

In System overview you can see which versions of AXIS Optimizer and AXIS Optimizer Body Worn Extension that are installed on different server and clients in your system.

To view active servers and clients:

1. In Management Client, go to Site Navigation > AXIS Optimizer > System overview.

To upgrade a certain server or client:

1. Go to that specific server or client and upgrade it locally.

To install AXIS Optimizer on several devices at the same time, without user interaction:

1. Right-click the Start menu.

2. Click Run.

3. Browse to the downloaded installation file and click Open.

4. Add one or more parameters at the end of the path.

5. Parameter	Description
   /SILENT	During a silent installation, the step-by-step guide and the background window are not shown. However, the installation progress window is shown.
   /VERYSILENT	During a very silent installation, neither the step-by-step guide and the background window nor the installation progress window are shown.
   /FULL	Install all components, for example the optional event server plugin. This is useful to combine with /VERYSILENT.
   /SUPPRESSMSGBOXES	Supress all message boxes. This is typically combined with /VERYSILENT.
   /log=<filename>	Create a log file.
   /NORESTART	Prevent the computer from restarting during the installation.

6. Press Enter.

Example

Verysilent installation, logged to output.txt, with no restart of the computer

.\AxisOptimizerXProtectSetup.exe /VERYSILENT /log=output.txt /NORESTART

AXIS Optimizer regularly checks for new versions of itself and notifies you when there are new updates. If you have a network connection, you’ll receive update notifications in Smart Client.

To change which type of notifications you receive:

1. In Smart Client, go to Settings > Axis general options > Notification preference.

2. Select All, Major or None.

To configure update notifications for all clients in your Milestone system, go to Management Client.

• Go to Site Navigation > AXIS Optimizer > System overview.

• Click System upgrade settings.

• Turn on or off Show upgrade notifications on all clients.

You can manually update AXIS Optimizer from both Management Client and Smart Client.

In Management Client

1. Go to Site Navigation > Basics > AXIS Optimizer.

2. Click Update.

In Smart Client

1. Go to Settings > Axis general options.

2. Click Update.

From the VMS management server, you can publish a local AXIS Optimizer version to your system. When you do this, AXIS Optimizer will be upgraded automatically on all client machines. Automatic upgrade never interrupts operator work. Silent installations are performed during machine or VMS client restarts. Automatic upgrade is supported also when the client is not connected to the internet.

To turn on automatic upgrade, you must publish a specific AXIS Optimizer version to your system:

1. On the VMS management server, install the AXIS Optimizer version you want to publish to the whole system.

2. On the VMS management server machine, open Management Client.

3. Go to Site Navigation > AXIS Optimizer > System overview.

4. Click System upgrade settings.

5. Make sure the Local version is correct and click Publish.

   If a published AXIS Optimizer version already exists, it’s replaced by the new version.

6. Note

   Client machines with an earlier AXIS Optimizer version than 4.4 must be manually upgraded.

To turn off automatic upgrade, you must reset the published version:

1. On the VMS management server machine, open Management Client.

2. Go to Site Navigation > AXIS Optimizer > System overview .

3. Click System upgrade settings > Reset published version.

• Smart Clients without AXIS Optimizer can access the published installer file from the management server web page (http://[serveradress]/installation/) even if they’re not connected to the internet.

• AXIS Optimizer installation package is available and configurable in Milestone’s Download manager.

• On federated or interconnected systems, you must publish AXIS Optimizer on each management server.

• After you published a new version of AXIS Optimizer you can monitor which clients has updated to the published version. Machines on the System overview page will show a green check symbol when they are running the published version.

• Automatic upgrade is turned off on machines that run a VMS Management server.

AXIS Optimizer includes a specific Axis Optimizer user role. The purpose is to make it simple for you to give users the required Smart Client privileges to use AXIS Optimizer’s features and capabilities.

If you run XProtect 2018 R3 or earlier, this role is only available in XProtect Corporate.

If you run XProtect 2019 R1 or later, this role is available for the these XProtect editions:

• Corporate

• Expert

• Professional+

• Essential+

• Express+

If you prefer to configure privileges manually, use this configuration to let a Smart Client operator use all capabilities included in AXIS Optimizer:

• Hardware: Driver Commands

• Cameras: AUX commands

Use Device assistant to give easy access to all Axis device settings directly in the VMS Management Client. You can easily find and reach your Axis device webpage inside Milestone XProtect to change different device settings. You can also configure applications installed on your devices.

1. In Management Client, go to Site Navigation > AXIS Optimizer > Device assistant.

2. Select a device and go to Device settings. The device’s webpage opens.

3. Configure the settings you want.

1. In Management Client, go to Site Navigation > AXIS Optimizer > Device assistant.

2. Select a device and go to Device settings. The device’s webpage opens.

3. Go to Apps. Where you find the Apps functionality depends on the device’s firmware version. For more information, see your device’s help.

4. Install the applications you want.

1. In Management Client, go to Site Navigation > AXIS Optimizer > Device assistant.

2. Select a device and go to Applications. If any applications are installed on the device, you’ll see them here.

3. Go to the relevant application, for example AXIS Object Analytics.

4. Configure the application to suit your needs.

1. In Management Client, go to Site Navigation > AXIS Optimizer > Device assistant.

2. Right-click a device and select Show updates. If any applications can be updated, you’ll see a list of available updates.

3. Download the update file.

4. Click How to update and follow the instructions.

1. In Management Client, go to Site Navigation > AXIS Optimizer > Device assistant.

2. Right-click a device and select Restart device.

1. In Management Client, go to Site Navigation > AXIS Optimizer > Device assistant.

2. Right-click a device and select Copy device address.

The AXIS Optimizer event server plugin allows you to create custom actions for Axis devices. When you use the XProtect rule engine and the Event server plugin, you can for example:

• Perform a custom action when the operator clicks a button in Smart Client. For a setup example, see Dry multiple cameras with one click.

• Perform actions without human interaction (automation). For a setup example, see Turn off privacy masks on multiple cameras automatically.

The Event server plugin consists of two parts:

• A separate plugin that runs on the event server. This populates the rule engine with new actions.

• A page called Axis actions in the Management server where you can create new action presets.

The custom actions for Axis devices are: Run operator control, Turn on/off radar, Start intercom call, and Dry camera (SpeedDry/wiper).

The Event server plugin is included in AXIS Optimizer. On a multi-PC system, you must install AXIS Optimizer on both the Management Client machine and the Event server machine.

The Event server plugin is an optional component that is included in the AXIS Optimizer installer. You can only install it on a video management system (VMS) event server. If the requirements are fulfilled, you’ll be prompted with an option to install the Event server plugin when you run the AXIS Optimizer installer. The Event server plugin works with Milestone XProtect 2018 R1 or later.

With the Event server plugin you can set up custom rules to make life easier for the operators. In this example we will show how to dry all cameras in a specific area by clicking an overlay-button.

1. Add a user-defined event:

2. 1. Go to Site Navigation > Rules and Events and right-click User-defined Event.

   2. Select Add User-defined Event and enter a name, in this example “Dry all cameras”.

3. Create a new rule:

4. 1. Go to Site Navigation > Rules and Events and right-click Rules.

   2. Select Add Rule and enter a name, in this example “Dry all cameras Rule”.

   3. Select Perform an action on <event>.

   4. In the Edit the rule description field, click event.

   5. Go to Events > External Events > User-defined Events and select Dry all cameras.

   6. Click Next until you get to Step: 3 Actions.

   7. Select the action Axis: Dry <camera>.

   8. In the Edit the rule description field, click Axis: Dry camera.

   9. In the Select Triggering Devices window, choose Select devices and click OK.

   10. Select which devices you want to trigger the action and click OK, then Finish.

5. In Smart Client, add the user-defined event as an overlay-button on a map or video view.

6. Click the overlay-button and make sure the rule works as you want.

With the Event server plugin you can set up custom rules to make life easier for the operators. In this example we will show how to turn on autofocus for all cameras with just one click.

1. Add a user-defined event:

2. 1. Go to Site Navigation > Rules and Events and right-click User-defined Event.

   2. Select Add User-defined Event and enter a name, in this example “Autofocus”.

3. Create a new rule:

4. 1. Go to Site Navigation > Rules and Events and right-click Rules.

   2. Select Add Rule and enter a name, in this example “Perform autofocus”.

   3. Select Perform an action on <event>.

   4. In the Edit the rule description field, click event.

   5. Go to Events > External Events > User-defined Events and select Autofocus. Click OK.

   6. Click Next until you get to Step: 3 Actions.

   7. Select the action Axis: Run autofocus on <camera>.

   8. In the Edit the rule description field, click Axis: Run autofocus on camera.

   9. In the Select Triggering Devices window, choose Select devices and click OK.

   10. Select which devices you want to trigger the action on and click OK, then Finish.

5. In Smart Client, add the user-defined event “Autofocus” as an overlay-button on a map or video view.

6. Click the overlay-button and make sure the rule works as you want.

With the Event server plugin you can set up custom rules to make life easier for the operators. In this example we show how to activate multiple strobe sirens with one click in Smart Client.

1. Create a user-defined event:

2. 1. Go to Site Navigation > Rules and Events and right-click User-defined Event.

   2. Select Add User-defined Event and enter a name, for example “Trigger all strobe sirens”.

3. In Device assistant, create strobe siren profiles:

4. 1. Go to Site Navigation > AXIS Optimizer > Device assistant.

   2. Select a strobe siren. The strobe siren’s webpage opens.

   3. Go to Profiles and click Add profile.

   4. Configure what you want the strobe siren to do when the operator triggers the strobe sirens in Smart Client.

   5. Create the same profiles on the other strobe sirens. You must use the same profile name on all devices.

5. In Axis actions, create an action preset:

6. 1. Go to Site Navigation > Rules and Events > Axis actions.

   2. Click Add new preset.

   3. Go to Select strobe siren and click Strobe siren.

   4. Select strobe sirens you want to use and click OK.

      You’ll see a list of the strobe sirens’ profiles.

   5. Select the strobe siren profile you created in the previous step. The action preset is saved automatically.

   6. Press F5 to refresh the server configuration. Now you can to start to use the new action preset you created.

7. Create a rule:

8. 1. Go to Site Navigation > Rules and Events and right-click Rules.

   2. Select Add Rule and enter a name, for example “Trigger all strobe sirens rule”.

   3. Select Perform an action on <event>.

   4. In the Edit the rule description field, click event.

   5. Go to Events > External Events > User-defined Events and select Trigger all strobe sirens.

   6. Click Next until you get to Step 3: Actions.

   7. Select the action Axis: Run a profile on a strobe siren <preset>.

   8. In the Edit the rule description field, click preset.

   9. Select which preset you want to use.

   10. Click Next, then Finish.

9. In Smart Client, add the user-defined event as an overlay-button on a map or video view.

10. Click the overlay-button and make sure the rule works as you want.

With the Event server plugin you can automate certain actions. In this example we will show how to automatically turn off privacy masks on multiple cameras when an analytics event occurs. The event in the example is that humans or vehicles enter an area where they shouldn’t normally be. Therefore, we want to automatically turn off the privacy masks to get a better view of what’s happening.

The workflow is:

1. Configure an analytics scenario in AXIS Object Analytics (or other analytics application of your choice)

2. Add operator controls to relevant cameras

3. Create action presets

4. Create a rule to turn off privacy masks when the analytics event occurs

5. Create a rule to turn on the privacy masks again

6. Test the rule and make sure everything works as you want.

1. Go to Site Navigation > AXIS Optimizer > Device assistant and find the device with the analytics you want to use.

2. Click Applications and create an analytics scenario that will trigger the action.

3. Go to Devices > Cameras and find the camera you created the analytics scenario on.

4. In the Properties window, click Events > Add.

5. Select a driver event, in this example “Object Analytics: Event test Rising” and click OK.

6. Click Add and select the driver event “Object Analytics: Event test Falling”. Then click OK.

7. Click Save.

1. Go to AXIS Optimizer > Operator controls and open the Controls library.

2. In the Configuration window, select the relevant folder and activate both Turn off privacy mask and Turn on privacy mask.

1. Go to Rules and Events > Axis actions and click Add new preset.

2. Click Cameras and select relevant cameras. In this example: AXIS P1375 and AXIS Q6075-E. Then, select the control Turn on privacy mask.

3. Click Add new preset > Cameras and select relevant cameras. In this example: AXIS P1375 and AXIS Q6075-E. Then, select the control Turn off privacy mask.

1. Go to Site Navigation > Rules and Events and right-click Rules.

2. Select Add Rule and enter a name, in this example “Turn off privacy mask on analytics”.

3. Select Perform an action on <event>.

4. In the Edit the rule description field, click event. Go to Devices > Configurable Events and select Object Analytics: Event test Rising.

5. In the Edit the rule description field, select a device, in this example AXIS P1375.

6. Click Next until you get to Step: 3 Actions.

7. Select the action Axis: Run operator control: <preset>.

8. In the Edit the rule description field, click preset. Then add the target Turn off privacy mask on 2 cameras and click OK.

9. Click Finish.

1. Select Add Rule and enter a name, in this example “Turn on privacy mask on analytics stop”.

2. Select Perform an action on <event>.

3. In the Edit the rule description section, click event. Go to Devices > Configurable Events and select Object Analytics: Event test Failing.

4. In the Edit the rule description section, select a device, in this example AXIS P1375.

5. Click Next until you get to Step: 3 Actions.

6. Select the action Axis: Run operator control: <preset>.

7. In the Edit the rule description section, click preset. Then add the target Turn on privacy mask on 2 cameras and click OK.

8. Click Finish.

1. Go to AXIS Optimizer > Device assistant and find the device with the analytics you’ve used to create the automation. In this example AXIS P1375.

2. Open the relevant scenario and click Test alarm.

With the event server plugin, you can set up custom rules to automate actions. In this example, we show how to activate strobe sirens automatically when a camera detects motion.

1. Create strobe siren profiles:

2. 1. Go to Site Navigation > AXIS Optimizer > Device assistant.

   2. Go to Axis output devices and select a strobe siren. The strobe siren’s webpage opens.

   3. Go to Profiles and click Add profile.

   4. Make sure to choose the same profile name for all the sirens.

   5. Configure what you want the strobe siren to do when it detects motion.

3. Create action presets for start and stop:

4. 1. Go to Site Navigation > Rules and Events > Axis actions.

   2. To create a start preset, go to Strobe siren and click Add new preset.

   3. Go to Select strobe siren and click Strobe siren.

   4. Select one or more strobe sirens from the list.

   5. Select the siren profile that you created previously from the list. The action preset is saved automatically.

   6. To create a stop preset, click Add new preset.

   7. Go to Select strobe siren and click Strobe siren.

   8. Select the same strobe sirens from the list that were chosen for the start preset.

   9. Go to Select action and select Stop.

   10. Select the same siren profile that was created for the start action. The action preset is saved automatically.

   11. Click click to refresh or press F5 to refresh the server configuration.

5. Create a rule:

6. 1. Go to Site Navigation > Rules and Events > Rules.

   2. Right-click Rules, select Add Rule, and enter a name.

   3. Under Edit the rule description, click event.

   4. Go to Devices > Predefined Events and select Motion Started.

   5. Under Edit the rule description, click devices/recording_server/management_server.

   6. Select the camera that should trigger the strobe sirens.

   7. Click Next until you get to Step 3: Actions.

   8. Select the action Axis: Start or stop a profile on a strobe siren: <preset>.

   9. Under Edit the rule description, click preset.

   10. Select the start preset that you created previously.

   11. Click Next and select Perform stop action on <event>.

   12. Click Next and select Axis: Start or stop a profile on strobe siren: <event>.

   13. Under Edit the rule description, click preset.

   14. Select the stop preset that you created previously.

   15. Select Finish.

7. Test that the strobe sirens run correctly when there is motion detected by the camera.

With the event server plugin, you can set up custom rules to automate actions, so called action presets. In this example, we show how to automatically play an audio clip on an audio speaker or in a speaker zone, when a camera detects motion.

1. To upload an audio clip:

2. 1. Place the audio clip that you want to upload to the speakers in the default folder C:\Users\Public\Documents\AXIS Optimizer for Milestone XProtect - Audio Clips\.

   2. In Management Client, go to Site Navigation > AXIS Optimizer > Speaker manager and select a speaker, device group, or speaker zone from the list.

   3. Note

      For more information on how to turn on AXIS Audio Manager Edge mode, see Access AXIS Audio Manager Edge mode.

   4. Go to Audio clips and click + in front of the audio clip that you want to upload.

   5. Without AXIS Audio Manager Edge mode, repeat steps 1.2-1.3 for each speaker that you want to play the audio clip from. Make sure to upload the same audio file to each speaker.

3. To create action presets for playing an audio clip on a speaker or in a speaker zone:

4. 1. Go to Site Navigation > Rules and Events > Axis actions.

   2. To create a preset, go to Audio clips and click Add new preset.

   3. With AXIS Audio Manager Edge mode, go to Select playback destination.

      Without AXIS Audio Manager Edge mode, go to Select speaker.

   4. Select a speaker or a speaker zone.

   5. From the list, select the audio clip that you uploaded in step 1. The action preset is saved automatically.

   6. Click click to refresh or press F5 to refresh the server configuration.

5. To create a rule:

6. 1. Go to Site Navigation > Rules and Events > Rules.

   2. Right-click Rules, select Add Rule, and enter a name.

   3. Under Edit the rule description, click event.

   4. Go to Devices > Predefined Events and select Motion Started.

   5. Under Edit the rule description, click devices/recording_server/management_server.

   6. Select the camera that should trigger the action preset or audio clip.

   7. Click Next until you get to Step 3: Actions.

   8. Select the action Axis: Play audio clip: <preset>.

   9. Under Edit the rule description, click preset.

   10. Select the preset that you created in the previous step.

   11. Select Finish.

7. Test that the audio clip plays correctly when motion is detected by the camera.

If a rule doesn't work, first check the event server messages to see that the event service is running.

You can also check the AXIS Optimizer logs on the event server. If Management Client or Smart Client are available, use them to enable and to save logs.

When using AXIS Optimizer list manager, you can centrally manage license plate lists for all cameras at once. You can create and manage allow lists, block lists, and custom lists directly from Milestone XProtect. The system supports combining lists. This means that you can have a global list that applies to all cameras in the system and local lists that applies to specific cameras.

Centralized list management is useful, for example, when you want to automate parking entry and exit or want to receive an alarm when the system registers a certain license plate.

You must be an administrator to create and edit lists. It's possible to give read and edit rights to other roles, see section Configure list permissions.

1. In Management Client, go to Site Navigation > AXIS Optimizer > License plate lists.

2. Select the cameras that you want to send the allow list, block list, and custom list to.

3. (Optional) Add user roles that can view and edit the allow list, block list, and custom lists.

4. Add license plates to the allow list, block list, and custom list.

   You can also import existing license plate lists.

   When the list gets status Synchronized, it has been pushed to the cameras you selected.

You can configure which user roles that can edit the allow list, block list, and custom list. This is useful for example when the administrator has set up the lists, but you want the operator to add visitors based on daily needs.

In Management Client

All permissions to view and edit lists can be chosen individually for each list.

1. Go to Security > Roles and select a role.

2. Go to the AXIS Optimizer tab.

3. Under Role Settings, go to AXIS Optimizer > License plate lists. Select a list and select Read and Edit license plates.

4. • For older versions than XProtect 2023 R2, go to MIP > AXIS Optimizer > AXIS Optimizer Security > License plate lists and select Edit license plate lists.

In Management Client

1. Go to Site Navigation > AXIS Optimizer > License plate lists.

2. Select the site that you want to edit.

3. Update Cameras or License plates as needed.

   When the list gets status Synchronized, your changes have been pushed to the cameras you selected.

In Smart Client

1. Go to Axis license plates and click License plate lists.

   If you don’t see the tab, go to Settings > Axis search options and select Show license plate tab.

2. Select the site that you want to edit.

3. Add license plates to the allow list, block list, and custom list.

   You can also import existing license plates lists.

   When the list gets status Synchronized, it has been pushed to the cameras you selected.

You can import lists in several text or CSV formats.

• Allowed text format: one license plate on each line

• Allowed CSV formats:

• • One license plate on each line

  • Two fields: license plate and date

  • Three fields: license plate, owner, and comment

  • Four fields: license plate, owner, comment, and the string “Active” or “Inactive”. (Same format as when you export a list.)

In Management Client

1. Go to Site Navigation > AXIS Optimizer > License plate lists.

2. Select the site that you want to edit.

3. Go to Allowed, Blocked, or Custom.

4. Click and then select Import to allow list, Import to block list, or Import to custom list.

5. In the Reset list dialog:

6. • Click Yes to remove all existing license plates and add only the newly imported license plates to the list.

   • Click No to merge the newly imported license plates with the existing license plates on the list.

In Smart Client

1. Go to Axis license plates and click License plate lists.

   If you don’t see the tab, go to Settings > Axis search options and select Show license plate tab.

2. Select the site that you want to edit.

3. Go to Allowed, Blocked, or Custom.

4. Click and then select Import to allow list, Import to block list, or Import to custom list.

5. In the Reset list dialog:

6. • Click Yes to remove all existing license plates and add only the newly imported license plates to the list.

   • Click No to merge the newly imported license plates with the existing license plates on the list.

In Management Client

1. Go to Site Navigation > AXIS Optimizer > License plate lists.

2. Select the site that you want to edit.

3. Go to Allowed, Blocked, or Custom.

4. Click and then select Export allow list, Export block list, or Export custom list.

   The exported list will be in CSV format with four fields: license plate, owner, comment, and Active or Inactive status.

In Smart Client

1. Go to Axis license plates and click License plate lists.

   If you don’t see the tab, go to Settings > Axis search options and select Show license plate tab.

2. Select the site that you want to edit.

3. Go to Allowed, Blocked, or Custom.

4. Click and then select Export allow list, Export block list, or Export custom list.

   The exported list will be in CSV format with four fields: license plate, owner, comment, and Active or Inactive status.

• You can create several sites.

• Each site is associated with one or several cameras that have AXIS License Plate Verifier installed.

• Each site is associated with one or several Milestone XProtect user roles. The user role defines who has permission to read and edit the license plate lists.

• All lists are stored in a Milestone database.

• When you add the camera to a site, already existing license plates on the camera are overwritten.

• If the same camera is present in several sites, the camera will receive the sum of all lists.

• If the same license plate is present in several lists, “block” has the highest priority, “allowed” has medium priority, and “custom” has the lowest.

• For each license plate, you can add information about the vehicle owner. However, this information is not synchronized to the cameras.

The operator controls allow you to access an Axis camera’s specific features directly from Smart Client. Which features you’ll have access to depends on which cameras you have in your system and the features they have. In addition to the pre-installed operator controls, you can create custom ones. You can also configure which controls an operator has access to.

Some examples of operator controls are:

• Turn on or off wiper

• Turn on or off heater

• Turn on or off IR

• Focus recall

• Turn on or off WDR

• Turn on or off electronic image stabilization (EIS)

• Turn on or off privacy masks.

For information about your camera's specific operator controls, refer to the datasheet.

1. In Smart Client, click Live and go to your Axis camera.

2. Click and select which function to use.

The focus recall function allows you to save focus areas to which the PTZ camera returns automatically when it moves to that area of the scene. This is especially useful in low light conditions, where the camera would otherwise have trouble finding the focus.

1. In Smart Client, move the camera to the area you want to focus on.

2. Note

   Light conditions must be good when you set the focus area.

3. Focus the camera.

4. Select Add Focus Recall Zone.

Later, when you pan or tilt the camera and move the view to an area, the camera automatically recalls the preset focus for that view. Even if you zoom in or out, the camera will keep the same focus position.

If the zone is incorrectly configured, select Remove Focus Recall Zone.

Cameras with autofocus can adjust the lens mechanically and automatically so that the image stays focused in the area of interest when the view changes.

Autofocus a PTZ camera

1. In Smart Client, select a camera view.

2. Click and go to Set Focus > AF.

   Focus Control allows you to move the focus point closer or further away:

3. • For a large step, click the large bar.

   • For a small step, click the small bar.

Autofocus fixed box and fixed dome cameras

1. In Smart Client, select a camera view.

2. Click and go to Autofocus.

The speed dry function enables the dome to shake itself off when it becomes wet. When the dome vibrates at high speed, the surface tension of the water breaks and removes the drips. This allows the camera to produce sharp images even in rainy weather.

To turn on the speed dry function

1. In Smart Client, select a camera view.

2. Click and go to PTZ > Speed Dry.

To turn on the wiper function

The wiper removes excess water and rain from the lens of Axis positioning cameras.

1. In Smart Client, select a camera view.

2. Click .

If you have a camera embedded with spot temperature reading in your system, you can measure the temperature directly in the camera view. The AXIS cameras with spot temperature reading are AXIS Q1961-TE, AXIS Q2101-E and AXIS Q2901-E.

1. In Smart Client, open a camera view in a camera embedded with spot temperature reading.

2. To measure the spot temperature, click and select:

3. • Measure spot temperature for AXIS Q2901-E.

   • Enable temperature spot meter for AXIS Q1961-TE and AXIS Q2101-E.

4. Click any area in the view, and you’ll see the current spot temperature.

   For Q1961-TE and AXIS Q2101-E, click Done.

5. For AXIS Q1961-TE and AXIS Q2101-E, the spot temperature will remain on the image until disabled:

6. • Select > Disable temperature spot meter.

With autotracking, the camera automatically zooms in on and tracks moving objects, for example a vehicle or a person. You can manually select an object to track, or set up trigger areas and let the camera detect moving objects. When the camera doesn't track an object, it returns to its home position after 5 s.

• You configure the trigger areas in Management Client.

• In Smart Client you’ll see:

• • Red square: the tracked object

  • Yellow zones: trigger areas

  • Blue zones: objects perceived as not moving or static

1. In Management Client, add the camera that supports Autotracking 2.0 to the Recording Server.

2. Make sure the camera and metadata devices are enabled.

3. Select Metadata 1 for your camera and click Settings.

4. Go to Metadata stream > Event data and select Yes.

5. Click Save.

6. Make sure the Autotracking 2 application has started:

7. 1. In Management Client, go to AXIS Camera Assistant and select your camera.

   2. Go toSettings > Apps > axis-ptz-autotracking. Start the application if it’s turned off.

8. Setup zones (profiles):

9. 1. In Management Client, go to AXIS Camera Assistant and select your camera.

   2. Go to Settings > Profiles.

   3. Click +.

   4. Enter a name and select a preset position for the profile, then click Done.

      A yellow square appears: the trigger area.

   5. To move the trigger area, click inside it and drag. To modify the size and shape of the trigger area, click and drag the anchor points.

1. In Smart Client, click .

2. Select Turn on autotracking or Turn off autotracking.

If you hover the mouse over or very near an object, the overlay will be filled. Right clicking when hovering an object sets that object as a target, and the camera will start to track the targeted object. The camera resets after 5 s if the object can't be tracked anymore.

1. In Management Client, go to Site Navigation > AXIS Optimizer > Operator controls.

2. Select a device or a group of devices.

3. Click Add new control.

4. Enter a Name and a Description.

5. Select Administrator if you want the operator control to be available only to users with administrator rights.

6. Add the VAPIX URL for the specific control.

   Example: To add a Defog on operator control, enter this URL: /axis-cgi/param.cgi?action=update&imageSource.IO.Sensor.Defog=on.

   To learn more about Axis network device APIs, see the VAPIX Library.

7. Go to Smart Client and test that the operator control works as expected.

You can configure which operator controls an operator in Smart Client has access to.

1. In Management Client, go to Site Navigation > AXIS Optimizer > Operator controls.

2. Select a device or a group of devices.

3. Select which operator controls you want the operators to have access to in Smart Client.

The Speaker manager integrates Axis audio products into the VMS, to give you the full functionality of your Axis devices.

• Access speakers related to your camera

  Connect cameras to a speaker or speaker groups, and access speakers from the live view. You no longer need to find your speakers manually.

• Send audio to a group of speakers

  Send audio to many speakers with a single click. Use the groups already defined in your system.

• Manage audio clips

  Set up your local audio clip library and upload audio clips to your speakers with a single click.

• Take immediate action with your speakers

  Respond quickly to an alarm without leaving the Alarm Manager.

• Synchronize audio between speakers

  If you want to use your audio system for background music, the Speaker manager can help you set up zones to synchronize the audio between your speakers.

AXIS Audio Manager Edge mode makes it possible to use all the features in Speaker manager with an AXIS Audio Manager Edge audio system. With AXIS Audio Manager Edge mode, you can mix live or pre-recorded announcements with ads and background music. It’s also easy to use to schedule and set up weekly content.

In Management Client, you can turn on AXIS Audio Manager Edge mode in Speaker manager.

1. Go to Site Navigation > AXIS Optimizer > Speaker manager.

2. Turn on AXIS Audio Manager Edge mode.

To learn more about AXIS Audio Manager Edge, see AXIS Audio Manger Edge user manual.

To get started with Axis speakers, or configure speakers in AXIS Audio Manager Edge mode, start by setting up the system based on the mode you want:

• To configure and access speakers:

• • If you use the AXIS Audio Manager Edge mode, see Configure speakers and zones in AXIS Audio Manager Edge mode.

  • Otherwise, see Configure speakers without AXIS Audio Manager Edge mode.

• To access speakers directly from Milestone XProtect camera views, see Associate a camera to a speaker or device group.

• To play audio clips from the speakers, see Upload audio clips to speakers.

1. To play audio clips and speak live, you must first turn on paging for your zones.

2. In Management Client, go to Site Navigation > Devices > Speakers to add device groups, or add and remove speakers from device groups.

3. Go to Site Navigation > AXIS Optimizer > Speaker manager, and make sure that AXIS Audio Manager Edge mode is turned on.

   Speaker manager will then search for all speakers in the Milestone XProtect system, and show all AXIS Audio Manager Edge sites and zones that can be used in Smart Client.

4. In the site list, select a zone with paging off.

5. Select Turn on paging for the zone.

1. In Management Client, go to Site Navigation > Devices > Speakers to add device groups, or add and remove speakers from device groups.

2. Go to Site Navigation > AXIS Optimizer > Speaker manager and click .

3. 1. In the Manage Side Panel window, select the speakers that you want to show in Smart Client.

   2. Click Add and OK.

      The speakers in the Visible panel are now shown in Smart Client for all users that have access to the speaker.

4. To remove speakers:

5. 1. Go to Site Navigation > AXIS Optimizer > Speaker manager and click .

   2. In the Manage Side Panel window, select the speakers that you want to remove.

   3. Click Remove and OK.

To use a specific speaker, device group, or zone directly in Smart Client’s camera view, it’s possible to associate them to a camera.

1. In Management Client, go to Site Navigation > AXIS Optimizer > Speaker manager and select a speaker, device group, or zone.

2. In the Associated cameras window, click + and select the cameras that you want to associate the speaker, device group, or zone with.

3. When a camera is associated to a speaker, device group, or zone, is shown in the tool bar in Smart Client’s camera view.

To play audio clips on a speaker, device group, or zone from Smart Client, you must first upload the audio clips to the speakers in Management Client.

1. Place the audio clips you want to upload to the speakers in the default folder C:\Users\Public\Documents\AXIS Optimizer for Milestone XProtect - Audio Clips\.

2. In Management Client, go to Site Navigation > AXIS Optimizer > Speaker manager and select a speaker, device group, or zone.

3. Go to Audio clips and click + in front of the clips you want to upload to the speakers.

To change the volume of your speakers.

1. If you are using AXIS Audio Manager Edge, do the following:

2. 1. In Management Client, go to Site Navigation > Speaker manager and make sure that AXIS Audio Manager Edge mode is turned on.

   2. Select a site.

   3. Use AXIS Audio Manager Edge to manage the sound settings of your devices.

      For more information about changing the volume for your devices in AXIS Audio Manager Edge, see AXIS Audio Manager Edge user manual.

3. Otherwise:

4. 1. In Management Client, go to Site Navigation > Speaker manager and select a speaker, device group, or zone.

   2. Go to Volume and adjust to the wanted volume.

1. In Smart Client, go to Live > MIP plug-ins > Axis speaker control and select a speaker, device group, or zone in the drop-down list.

2. Let your microphone send audio to the speaker:

3. 1. Press and hold while you speak.

      Make sure that the microphone level meter is showing voice activity.

4. Play an audio clip on the speaker:

5. 1. Go to Media clip and select an audio clip in the drop-down list.

   2. To start playing the audio clip on the selected speaker, click play.

1. In Smart Client, go to a camera view.

2. If there is an association made to a speaker, device group, or zone, is visible in the tool bar.

3. Click to open the Axis speaker control window.

4. Let your microphone send audio to the speaker:

5. 1. Press and hold while you speak.

      Make sure that the microphone level meter is showing voice activity.

6. Play an audio clip on the speaker:

7. 1. Go to Media clip and select an audio clip in the drop-down list.

   2. To start playing the audio clip on the selected speaker, click play.

Axis network intercoms combine communication, video surveillance, and remote entry control in one device. AXIS Optimizer makes it easy to configure and use Axis intercoms together with Milestone XProtect. For example, you can receive calls and open doors.

The door lock should typically be connected to the first relay on the intercom. AXIS Optimizer determines which output port to use based on the Usage information. It will use the first port having Usage = Door (RELAY1 by default).

1. Install the latest version of AXIS Optimizer on each client where you want to receive calls and control the door from.

2. Log in to Management Client.

3. Add your Axis intercom to the Recording Server.

4. In Management Client, enable all devices that you need. To be able to receive calls in Smart Client you need:

5. • Camera 1

   • Microphone

   • Speaker

   • Metadata

   • Input 2 (optional if you have a security relay connected to the intercom on port 2)

   • Output connected to the door. If you know which output that’s connected to the door, select that one. If not select all ouputs.

6. Go to Site Navigation > Devices > Metadata select the Metadata device for the intercom you’re installing.

7. Click Settings.

8. Set Event data to Yes.

9. Click Save.

10. If you've enabled Input 2, you need to set it up too.

11. 1. Go toSite Navigation > Devices > Input and select Input 2.

    2. Click Events and then Add.

    3. Select Input Falling event and add it to the enabled inputs. Repeat for Input Rising event.

    4. Click Save.

12. For setting up permissions for specific roles, see Set permissions for intercom.

13. Make a test call.

To handle a call, you must first enable permissions.

1. Go to Site Navigation > Security > Roles.

2. Choose a role.

3. Go to Overall Security.

4. Make sure that the required permissions for each security group are set. Go to Hardware and select Driver commands.

5. To set permissions on a system level, go to Overall Security.

   To set permissions on a device level, go to Device.

6. Set permissions for the security groups:

7. 1. Go to Cameras. Select Read and View live.

   2. Go to Microphones. Select Read and Listen.

   3. For Overall Security, go to Speakers. Select Read and Speak.

      For Device, go to Speakers and select Read. Then go to the tab Speech and select Speak.

   4. Go to Metadata. Select Read and Live.

   5. Go to Input. Select Read.

   6. Go to Output. Select Read and Activate.

To assign permissions to control which operators that handle calls from a certain intercom:

1. Select the Read permission for the metadata device 1 of the specific intercom.

2. Clear this permission for all other roles. Users that doesn't have permission will not be able to receive calls.

To view call history, you need additional permissions.

1. To set permissions on a system level, go to Overall Security.

   To set permissions on a device level, go to Device.

2. Select these permissions for the security groups:

3. 1. Go to Cameras. Select Playback and Read sequences.

   2. Go to Microphones. Select Playback and Read sequences.

   3. Go to Speakers. Select Listen, Playback, and Read sequences.

1. In Smart Client, go to Settings > Axis intercom options.

2. Click Test call.

3. Select an intercom and click Make call.

For each intercom and intercom view, click to quickly control the device.

When a visitor presses the call button on the intercom, a call window appears on each running Smart Client. The call window automatically selects the appropriate camera view when you resize the window, for example corridor or landscape view.

You can show up to three cameras at the same time in the call window. This means that you can see the intercom’s video stream and the video streams from two other cameras within the same call window. This is useful for example when you want to see the delivery person and the area around the delivery door at the same time.

To configure multiple cameras in the call window:

1. In Smart Client, go to Settings > Axis intercom options. Go to Call > Intercom settings.

2. Go to Selected device and select which device you want to configure.

3. Go to Multiple cameras. Select which intercom you want to see as camera 1 in the call window.

4. Select which associated cameras you want to see as camera 2 and camera 3 in the call window when the intercom calls.

5. Close the Intercom settings window.

With call window actions, you can set up user-defined events that are tied to rules in the XProtect rule engine. Which events you can set up and use depend on your role.

To set up call window actions:

1. In Smart Client, go to Settings > Axis intercom options.

2. Go to Call > Intercom settings.

3. Go to Selected device and select which device you want to configure.

4. Go to Call window actions to select the call window actions you want to use.

There are two types of call window actions:

• Access button action: When you set up an access button action, you override the default action of the Access button. For example, you can set up to open a set of doors with the Access button.

• Custom action: When you set up a custom action, a button is shown in the call window. You can trigger the custom action by clicking this button. A custom action is an action that don’t necessarily relate to door access, for example sending emails, triggering alarms or starting continuous recordings.

By default, all PCs connected to an intercom receives the calls. By adding call extensions and filtering on them in Milestone XProtect, you can configure the intercoms to route calls to certain Smart Clients in your Milestone system. You can set up schedules for the call routing and add fallback contacts. You can also route calls to SIP-based contacts and add them as fallback contacts.

1. In the intercom web interface

2. Go to Communication > SIP.

3. Select Enable SIP.

4. Go to Communication > Calls.

5. Turn off Make calls in the video management system (VMS).

6. Under Recipients, click to add a new contact. Enter information for the new contact and click Save. You can add several contacts.

7. • Under SIP address enter VMS_CALL:<extension>. Replace <extension> with the call extension name for your contact, for example ReceptionA.

   • If you want to set up a schedule for the contact, choose the contact’s Availability.

   • You can add a fallback contact who will receive the call if none of the original contacts replies, for example ReceptionB.

If your intercom uses an older firmware, see the product’s user manual for information on how to set up a new recipient. You should then use the action rule BUTTON: VMS call and specify your contact as recipient.

In Management Client

We recommend that you configure the intercoms in Milestone XProtect to use a metadata device for call detection. See Set up an intercom.

1. In Smart Client
2. Set up call extension for every user who should receive the calls. The setting is stored on the user level. This means that the user will receive the calls independent on which PC is used.

3. Log in to Smart Client as the user who should receive the calls.

4. Go to Settings > Axis intercom options.

5. Under Call > Call extension, enter the contact’s call extension name, for example ReceptionA. The user will now only receive calls if the call extension matches the filter value.

   If you want to add several call extension names, separate them with semicolon, for example ReceptionA;ReceptionC

In the call history you can view answered and missed calls, and if the door has been unlocked. You can select among the calls and view the corresponding playback video if available.

1. In Smart Client, go to the intercom’s view.

2. Click > Call history.

It’s possible to turn off the microphone when no calls are coming in to the Axis intercom. The microphone will be turned on when there’s an active call.

1. In Smart Client, go to Settings > Axis intercom options.

2. Select Turn off intercom microphone when no active call.

If a door has a security relay (Input 2), the door overlay in the Smart Client’s call window shows when the door is open or closed. This means that if someone opens the door by force while the door is locked, you can receive an alarm.

To configure the alarm:

1. In Smart Client, go to Settings > Axis intercom options > Administrator options.

2. Select Trigger an alarm when a door has been forced open.

If a door has a security relay (Input 2), the door overlay in the Smart Client’s call window shows when the door is open or closed. This means that if someone opens the door and the door stays open for too long, you can receive an alarm.

To configure the alarm:

1. In Smart Client, go to Settings > Axis intercom options > Administrator options.

2. Select Trigger an alarm when a door has been open longer than (s).

3. Enter for how long the door can stay open before the alarm goes off.

You can configure a client to not receive any calls. This means that when someone places a call, no call window opens on the specific client.

1. In Smart Client, go to Settings > Axis intercom options > Call.

2. Clear Receive calls on this client.

You can visualize audio in your system by adding one or several microphone views to Smart Client. Then you can monitor audio both in live view and playback. You can see when audio levels rise above a certain level using the built in audio detection on your Axis device. Typically uses cases are:

• Listen to several microphones at the same time

• Detect incidents with audio

• Investigate incidents after they happened

1. Set detection levels:

2. 1. In Management Client, go to Site Navigation > AXIS Optimizer > Device assistant and select your device.

   2. Open the Detectors settings. How you open these settings depends on your device’s firmware version.

   3. Go to Audio detection and modify Input 1 sound level to suit your needs.

3. Get events from the camera into Milestone XProtect:

4. 1. In Management Client, go to Site Navigation > Devices > Microphones.

   2. Click your microphone, then click Events.

   3. Add events Audio Falling and Audio Rising.

5. Configure for how long the system keeps metadata about detected audio:

6. 1. Go to Tools > Options > Alarm and Events > Device events.

   2. Find Audio Falling and set retention time.

   3. Find Audio Raising and set retention time.

7. Verify that you’ve set up audio recording. You can for example record audio all the time or a create a recording rule based on audio raising or audio falling events.

8. For each microphone you want to use with microphone view, repeat the steps above.

9. In Smart Client, go to Settings > Timeline > Additional data and select Show.

1. Open Smart Client and click Setup.

2. Go to Views.

3. Click Create new view and select a format.

4. Go to System overview > AXIS Optimizer.

5. Click Microphone view and drag it into the view.

6. Select a microphone.

7. Click Setup.

• Live view

• • Audio levels are displayed as a bar graph with current level to the right and up to 60 s audio history moving to the left.

  • Click in the view to listen to audio from the microphone.

  • In each microphone view there’s a headphone icon. Click the icon to mute or unmute audio from each view without having to select the view itself. This allows you to listen to several microphones at the same time.

• Playback

• • An icon will highlight when there’s detected audio available for the microphone.

  • Yellow bars indicate that audio has been detected according to the detection levels you’ve set on the device.

  • Click in the view to listen to audio from the microphone.

  • In each microphone view there’s a headphone icon. Click the icon to mute or unmute audio from each view without having to select the view itself. This allows you to listen to several microphones at the same time.

The microphone view allows you to listen to several microphones at the same time, both in live view and playback.

1. Configure VMS for microphone view.

2. Open Smart Client and click Setup.

3. Go to Views.

4. Click Create new view and select a split view.

5. Go to System overview > AXIS Optimizer.

6. For each microphone you want to listen to:

7. 1. Click Microphone view and drag it into the view.

   2. Select a microphone.

8. Click Setup.

9. For each microphone, decide if you want to mute or unmute it by clicking the headphone icon in each microphone view. Now you can listen to all the unmuted microphones at the same time.

You might want to monitor actions from areas where you’re not allowed to install cameras, for example restrooms. In microphone view you can quickly see when an incident happens that is, when the sound level exceeds the detection levels.

1. Configure VMS for microphone view. Remember to set relevant detection levels for the device and the area you want to monitor.

2. Add a microphone view with the device to live view in Smart Client, see Add microphone view to Smart Client.

After an incident occurred, you can quickly identify periods in the playback timeline when audio was detected by your microphones.

1. Configure VMS for microphone view.

2. Add one or several microphone views with relevant devices to playback in Smart Client, see Add microphone view to Smart Client.

AXIS Optimizer offers three search categories for Axis devices in Centralized search:

• Forensic search (object search)

• Vehicle search

• Zone speed search

• Container search

You can also add a separate license plate search tab to Smart Client, see Axis license plates.

Axis cameras with firmware 9.50 or later generate metadata that describes all currently moving objects in a camera's field-of-view. Milestone XProtect can record this data together with the corresponding video and audio. The Forensic search function in AXIS Optimizer allows you to analyze and search this data. Use Forensic search to get an overview of all activity in the scene or quickly find a specific object or event of interest.

1. Make sure that the camera has the latest firmware version.

2. Make sure your Milestone XProtect system has a correct version:

3. • Corporate 2019 R3 or later, or Expert 2019 R3 or later

   • Professional+ 2022 R3 or later, or Express+ 2022 R3 or later

4. Camera time must be synchronized with NTP.

5. To filter by object types Human, Vehicle, Bike, Bus, Car, or Truck:

6. 1. Use an Axis device with support for AXIS Object Analytics. See the Analytics filter in the Product selector.

   2. Go to System > Analytics metadata and enable Analytics Scene Description in the camera’s web page.

7. To filter by Vehicle color Upper body clothing color, or Lower body clothing color:

8. 1. Use an Axis device with support for AXIS Object Analytics. See the Analytics filter in the Product selector.

   2. Use an Axis device with ARTPEC-8 or CV25. See the System-on-chip filter in the Product selector.

1. In Management Client, make sure the metadata device is enabled for the cameras.

2. Go to Site Navigation > Devices > Metadata.

3. Select your device and click Record. Make sure Recording is enabled.

   By default, metadata is only recorded when Milestone XProtect detects motion in a scene. Therefore, we recommend to adjust the motion threshold to your environment so you don’t miss any object movements.

4. Click Settings and make sure Analytics data is enabled.

5. Open Smart Client’s live view and make sure that you see bounding boxes over objects and that the boxes display correctly.

   It can take a while for the clock to adapt to NTP time.

6. Wait at least 15 min to let the system record video and metadata. After that, you can start searching, see Perform a search.

7. Turn on Consolidated metadata to improve the search speed on devices running firmware 11.10 or higher. See Metadata and search.

1. In Smart Client, go to Search.

2. Select a time interval and one or several cameras.

3. Click Search for > Forensic search > New search. For each search result, you’ll see the object and the object’s travel path in the thumbnail.

4. • The thumbnail shows the video frame when the object was the most visible.

   • The green point marks the location where the camera first detected the object.

   • The red point marks the location where the camera last detected the object.

   • To see the complete video sequence for a search result, select it and click Play forward in the preview panel.

   • To hide the graphical overlays, go to Bounding boxes and select Hide.

   • Note

     Analytics applications that run on the camera, for example AXIS Object Analytics and AXIS Loitering Guard, might also burn in overlays in the video. To remove these overlays, go to the application’s web configuration page.

5. Select search filters to narrow down the number of search results.

   To learn more about how to use the different filters, see Fine-tune a search.

6. Select the search results you want to examine closer. You can for example bookmark them or Create a high quality PDF report.

To narrow down the search results you can use one or several search filters.

• Region of interest

  Detect objects that have moved in a specific area.

• Object direction

  Detect objects that have moved along a specific route in a scene: to the left, to the right, downwards, or upwards.

• Object type

  Detect objects of a certain type: human, vehicle, bike, bus, car or truck.

• Vehicle color

  Detect vehicles of the chosen color.

• Upper body clothing color

  Detect clothing of the chosen color on a person’s upper body.

• Lower body clothing color

  Detect clothing of the chosen color on a person’s lower body.

• Time-of-day

  Detect objects that were detected during a specific part of the day. This filter is useful when you search over several days, but you’re only interested in objects at a specific time of each day, for example during the afternoon.

• Minimum time in scene (s)

  Detect objects that were detected and tracked for a minimum number of seconds. This filter filters out uninteresting objects, for example objects far away and false objects (lighting effects). The default value is 1 s. This means that when the filter is not set, it excludes objects with a duration less than 1 s.

• Swaying objects (% of image)

  Exclude objects that only moved in a constraint area, for example a flag or a tree moving in the wind. The default value is 5-100%. This means that when the filter is not set, it excludes objects that did not move more than 5% of the image area.

• To get the correct video footage for the search results, it’s important to have the correct clock synchronization.

• The data analyzed in Forensic search doesn’t take the scene’s perspective into consideration. This means that an object’s size and speed differ depending on how close to the camera the object is.

• Weather conditions such as heavy rain or snow may affect the detection accuracy.

• If there’s a good contrast of the object in low light scenes, the analytic will become more accurate.

• A single object can, under some circumstances, generate multiple results. For example when tracking is lost when an object is temporary obscured by another object.

• Overlays may differ depending on XProtect version. For example: overlays in video preview require XProtect 2020 R3 and overlay colors require XProtect 2020 R2.

• For Forensic search to work on video streams that have been rotated 180 degrees, you must:

• • use firmware 10.6 or later on the cameras, or

  • use Device Pack 11.0 or later on the recording server

• The white balance setting in the camera should be accurate in order to get good color detection

When you use AXIS Optimizer together with certain applications installed on the camera, you can search, identify and share video evidence about vehicles. Vehicle search supports license plate data from these applications:

• AXIS License Plate Verifier by Axis Communications

• TraFFic CaMMRa by FF Group (version 1.3.1 + recommended)

• VaxALPR On Camera by Vaxtor Recognition Technologies

• VaxALPR On Camera MMC by Vaxtor Recognition Technologies

Which search filters you can use depends on which application you’ve installed on the cameras, see Fine-tune a search

1. In Management Client, add the camera that runs the chosen application.

2. Enable all devices that you need. To be able to use AXIS Licence Plate Verifier, Camera 1 and Metadata 1 are required.

3. Configure metadata:

4. 1. Go to Site Navigation > Recording Server and find the device.

   2. Select Metadata 1 and click Settings.

   3. Go to Metadata stream > Event data and select Yes.

5. Go to the Record settings tab and make sure that recording is enabled for metadata.

6. Click Save.

7. Configure the application so that it works for a standard user:

8. 1. Add read and playback rights on the specific camera and user.

   2. Add read and playback rights on the metadata for the specific camera and user.

1. In Smart Client, go to Search.

2. Select a time interval and one or several cameras.

3. Click Search for > Vehicle search > New search.

4. Select search filters to narrow down the number of search results.

   To learn more about the different filters, see Fine-tune a search.

5. Select the search results you want to examine closer. You can for example bookmark them or Create a high quality PDF report.

To narrow down the search results you can use one or several search filters. Different applications give you different filter options.

• License plate

  Find a specific license plate number.

  Application: AXIS License Plate Verifier, VaxALPR On Camera, TraFFic CaMMRa or VaxALPR On Camera MMC.

• Country

  Find vehicles from a certain country.

  Application: VaxALPR On Camera, TraFFic CaMMRa or VaxALPR On Camera MMC.

• Direction

  Find vehicles moving in a certain direction.

  Application: VaxALPR On Camera, TraFFic CaMMRa or VaxALPR On Camera MMC.

• Type of vehicle

  Find a certain type of vehicle.

  Application: TraFFic CaMMRa or VaxALPR On Camera MMC.

• Brand

  Find vehicles of a certain brand.

  Application: TraFFic CaMMRa or VaxALPR On Camera MMC.

• Model

  Find vehicles

  Application: TraFFic CaMMRa or VaxALPR On Camera MMC.

• Color

  Find vehicles in a certain color.

  Application: TraFFic CaMMRa or VaxALPR On Camera MMC.

In AXIS Optimizer, you can use Zone speed search to search for speeding vehicles that have been detected when entering a predetermined zone in a camera’s view. Zone speed search works along with the application AXIS Speed monitor to visualize the speed of vehicles in a radar detection zone in the camera's live view. With AXIS Zone speed search, you can set up specific filters to narrow your search, and export and share video evidence during investigations.

1. In Management Client, add the camera that runs the chosen application.

2. Enable all devices that you need. To be able to use AXIS Zone speed search, Camera 1 and Metadata 1 are required.

3. To configure metadata:

4. 1. Go to Site Navigation > Recording Server and find the device.

   2. Select Metadata 1 and click Settings.

   3. Go to Metadata stream > Event data and select Yes.

5. Go to the Record settings tab and make sure that recording is enabled for metadata.

6. Click Save.

7. To configure the application so that it works for a standard user:

8. 1. Add read and playback rights on the specific camera and user.

   2. Add read and playback rights on the metadata for the specific camera and user.

1. In Smart Client, go to Search.

2. Select a time interval and one or several cameras.

3. Click Search for > Zone speed search > New search.

4. Select search filters to narrow down the number of search results.

   To learn more about the different filters, see Fine-tune a search.

5. Select the search results you want to examine closer. You can for example bookmark them or Create a high quality PDF report.

To narrow down the search results of the speeding events, you can use one or several search filters.

• Max speed

  Filter the maximum speed of any object in the zone during the event duration. You can set both a lower and a upper limit for the maximum speed.

• Object type

  If Vehicle is selected, the search will only show speeding events where the fastest object in the zone was classified as a vehicle.

• Zone name

  Search and filter zones by name.

When you use AXIS Optimizer together with certain applications, you can search, identify and share video evidence about containers. Container search supports data from this application:

• VaxOCR Containers by Vaxtor Recognition Technologies

1. In Management Client, add the camera that runs the chosen application.

2. Enable all devices that you need.

3. Configure metadata:

4. 1. Go to Site Navigation > Recording Server and find the device.

   2. Select Metadata 1 and click Settings.

   3. Go to Metadata stream > Event data and select Yes.

5. Go to the Record settings tab and make sure that recording is enabled for metadata.

6. Click Save.

7. Configure the application so that it works for a standard user:

8. 1. Add read and playback rights on the specific camera and user.

   2. Add read and playback rights on the metadata for the specific camera and user.

1. In Smart Client, go to Search.

2. Select a time interval and one or several cameras.

3. Click Search for > Container search > New search.

4. Select search filters to narrow down the number of search results.

   To learn more about the different filters, see Fine-tune a search.

5. Select the search results you want to examine closer. You can for example bookmark them or Create a high quality PDF report.

To narrow down the search results you can use one or several search filters. All filter options come from the application VaxOCR Containers.

• Container code

  Find a specific container code.

• Owner

  Find containers belonging to a certain owner.

• Owner code

  Find containers belonging to a certain owner.

• Size

  Find containers of a certain size and type.

• Size code

  Find containers of a certain size and type.

• City or country

  Find containers from a certain city or country.

• Validation

  Find containers that have already been validated through their owner code or control digit.

Create a report based on your search results. You can use this function to include high resolution images in the result.

1. In Smart Client, perform a search.

2. Select the search results you want to include in the report.

3. Click > Create high quality PDF report.

4. (Optional) Enter Report name, Report destination and Notes.

5. For each search result, select which frame you want to include in the report. To enlarge an image, double-click.

6. Click Create. When the report is ready, you’ll get a notification.

You can add a separate tab for license plate search and management in Smart Client. This tab centralizes all operator tasks related to license plate management, search, and export based on the information provided by your LPR enabled Axis cameras.

• Make sure to have Milestone XProtect  2018 R3 or later

• Make sure to have Milestone Device Pack 10.1 or later

• Camera time must be synchronized with NTP

• Use one of the applications listed in

1. In Management Client, add the camera that runs the chosen application.

2. Enable all devices that you need. To be able to use AXIS Licence Plate Verifier, Camera 1 and Metadata 1 are required.

3. Configure metadata:

4. 1. Go to Site Navigation > Recording Server and find the device.

   2. Select Metadata 1 and click Settings.

   3. Go to Metadata stream > Event data and select Yes.

5. Go to the Record settings tab and make sure that recording is enabled for metadata.

6. Click Save.

1. In Smart Client, go to Axis license plates.

   If you don’t see the tab, go to Settings > Axis search options and select Show license plate tab.

2. Click Add camera... and select relevant cameras > Click Close.

   You must be an admin to add cameras to the system.

3. Enter a license plate and a Time interval to filter the search result.

   The search result will not display more than 5000 results.

4. • Enter a custom Time interval between two chosen dates, to filter the search result.

1. In Smart Client, go to Axis license plates.

   If you don’t see the tab, go to Settings > Axis search options and select Show license plate tab.

2. Click Add camera... and select relevant cameras > Click Close.

   You must be an admin to add cameras to the system.

3. Enter a license plate and select Time interval > Live to filter the search result.

   When license plates are detected by the camera, they will appear live in the list.

   The search result will not display more than 5000 results.

To narrow down the search results you can use one or several search filters.

• Time interval

  Filter on search hits within a period of time.

• License plate

  Filter on partial or complete license plate text.

• Cameras

  Filter on search hits detected by specific cameras.

• Direction

  Filter on vehicles moving in a certain direction.

• Lists

  Filter on search hits at certain sites, and filter on search hits in allow, block, and custom lists. For more information on how to set up lists, see Centrally manage license plate lists.

Use this function to compile your search results of interest as a PDF report with high quality images.

1. Click Export....

2. Select PDF....

3. (Optional) Enter Report name, Report destination, and Notes.

4. For each search result, select which frame you want to include in the report. To enlarge an image, double-click it.

5. Click Create. When the report is ready, you’ll get a notification.

Use this function to compile large numbers of search results as a CSV report.

1. Click Export....

2. Select CSV....

3. Choose a destination for the file to export to.

Dewarping flattens out and corrects the perspective of a geometric, distorted image caused by a wide-angle or fisheye lens. Axis dewarping in Milestone can be used with any Axis 360° panoramic camera. Dewarping is done either directly in the camera, or in Smart Client.

More details about dewarping:

• When you use client-side dewarping, you’ll get smooth dewarping both in live and recorded video.

• When you go back to a view, you’ll automatically go to the latest dewarping location.

• Dewarping is included when you export videos.

• You can save a home position, see Set a home position.

• You can configure if operators are allowed to control and edit dewarping views, see Allow operators to control and edit dewarping views.

1. Open Smart Client and click Setup.

2. Go to Views.

3. Click Create new view and select a format.

4. Go to System overview > AXIS Optimizer.

5. Click Dewarping view and drag it into the view.

6. Select a camera and the camera’s current mounting position.

7. Click Setup.

8. Go to the new dewarping view and click .

9. Click Set view type and select one option. Depending on how the camera is mounted, you can select Quad, Normal, Normal with overview or Panorama.

You can use dewarping views for multisensor panoramic cameras, for example AXIS P3807-PVE Network Camera and AXIS Q3819-PVE Panoramic Camera.

• Client-side stitching. If the camera is set to capture mode client dewarp, AXIS Optimizer performs stitching of the four images into one seamless panorama (only AXIS P3807-PVE).

• Horizon adjustment. It it possible to adjust the horizon of the panorama. This might be desired if the camera is tilted to the ground and the world horizon is curved. This will also make the virtual PTZ control more intuitive.

• PTZ control. Makes it possible to zoom in and move around in the image as if it was a PTZ camera.

1. If applicable, set the capture mode to Client Dewarp during the initial device setup.

2. Open Smart Client and click Setup.

3. Go to Views.

4. Click Create new view and select a format.

5. Go to System overview > AXIS Optimizer.

6. Click Dewarping view and drag it into the view.

7. Select a multisensor panoramic camera.

   The first time you add the multisensor panoramic camera to a dewarping view, a horizon calibration window will be displayed above the view.

8. Click the arrows to make the red line align to the world horizon.

9. Click Done to save your settings and exit the calibration mode.

Wide view is a view type for multisensor panoramic cameras. Turn on wide view if the normal 120° field of view isn’t enough. With wide view, the image will always be dewarped. Turn off wide view to get a transition to normal view when fully zoomed out.

1. In Smart Client, open a dewarping view.

2. Go to the position you want to save as home position.

3. Click , then Set home position.

You can configure if operators should be allowed to control and edit dewarping views, see Customize feature access for operators.

Performance considerations

• Axis video dewarping is performed in the GPU when possible, but the video dewarping will also put load on the CPU.

• To prevent the frame rate to drop in a large view with many dewarping views, consider the following:

• • Camera resolution. A high camera resolution, for example 2880x2880, requires a lot of of computer power compared to for example 1920x1920.

  • Camera frame rate. If you don’t need a high frame rate, a change to a lower frame rate can prevent stuttering in the dewarping view and other views.

  • Monitor resolution. High resolution monitors, for example 4K, require a lot of resources to show the video. If you don’t need the higher resolution, a lower monitor resolution will make it possible to run more dewarped views without stuttering.

Dynamic resolution

• The video stream will be automatically downscaled, if possible, without decreasing video quality. This can improve the performance of the dewarping views.

• If you experience a blink when zooming in from overview, it can help to turn off dynamic resolution.

• To turn on or off dynamic resolution: in Smart Client, go to Settings > Axis dewarping options > Rendering options and select or clear Dynamic resolution.

• Dynamic resolution is enabled by default.

Compatibility rendering

• If there is any visual errors in the dewarping image, for example black image, or the performance seems worse than expected, enable compatibility rendering. Note that a negative effect of compatibility rendering is that transitions between views and scrubbing in playback may flicker.

• To turn on or off compatibility rendering: open Smart Client and go to Settings > Axis dewarping options > Rendering options and select or clear Use compatibility rendering.

• Use compatibility rendering is disabled by default.

What to expect

In a reference system with an Intel i7 8700 NVIDIA Gefore 1050 GTX and three 1920x1080 monitors you can expect that:

• 7 dewarping views in 1920x1920 resolution and 25fps can be run without frame drops, or

• 4 dewarping views in 2880x2880 resolution and 25 fps

If one of the three displays runs in 4K resolution instead of 1920x1080 you can expect that:

• 5 dewarping views in 1920x1920 resolution and 25fps can be run without frame drops, or

• 3 dewarping views in 2880x2880 resolution and 25 fps. One dewarping view on each monitor.

Frame rate and resolution scales are linear. A computer that can run 5 dewarped views with 30 fps can run 10 views if you reduce the frame rate to 15 fps.

AXIS Optimizer Body Worn Extension lets in-field camera users record, tag and share video with office-based investigators, who can search for and manage video evidence using Milestone XProtect. The service securely enables connection and transfer between Axis body worn system and Milestone XProtect. AXIS Body Worn Extension is a free, standalone service you must install on the recording server.

• To download the service itself or read the integration guide and solution note, go to axis.com.

• To read the user manual, go to axis.help.com.

By default, an operator has access to all AXIS Optimizer features in Smart Client if they also have access to the device in the Milestone XProtect. However, in Management Client, it’s possible to configure what features an operator has access to through Role settings.

Turn on Role settings:

1. In Management Client, go to Site Navigation > Security > AXIS Optimizer Security.

2. Select Enable Role settings.

3. Restart Management Client.

Configure Role settings:

1. In Management Client, go to Site Navigation > Security > Roles.

2. Select a role and go to Overall security.

3. Click AXIS Optimizer Security.

4. Select which features the role should have access to or not.

5. • Full control
     Gives the operator role full access to all AXIS Optimizer features.

   • Edit (not applicable)
     A Milestone XProtect function that isn’t applicable to AXIS Optimizer Role settings.

   • Access AXIS Optimizer in Management Client
     The operator role can use all AXIS Optimizer administration features in Management Client.

   • Manage AXIS Optimizer security
     The operator role can change the settings in Site Navigation > Security > AXIS Optimizer Security.

   • Dynamic camera operator controls
     The operator role gets access to all pre-installed functions the system finds on a device.

   • Remote focus operator control
     The operator role can set the remote focus on fixed dome cameras.

   • PTZ operator controls
     The operator role gets access to specific operator PTZ controls: focus control, PTZ presets, operator controls for Autotracking 2, washer and SpeedDry/Wiper button.

   • Temperature spot measurement control
     The operator role can measure the spot temperature on AXIS Q2901-E.

   • Speaker operator control
     The operator role gets access to all Speaker manager features in Smart Client.

   • Access visitor management
     The operator role gets access to everything related to visitor management, for example answer a call and open a door in live view.

   • Access call history
     The operator role can access a intercom's call history. You must allow Access visitor management to use this setting.

   • Extended search functions
     If you select Deny, the AXIS License Plate Verifier tab is hidden in Smart Client. Also, you can’t use the Vehicles and Containers search in the Centralized search.

   • Control dewarping view
     The operator role can move around in the dewarping views.

   • Edit a dewarping view’s home position
     The operator role can edit a camera’s home position.

   • Web page
     The operator role can create a view with a web browser.

6. Click Save.

7. Restart all running Smart Clients in your system.

1. In Management Client, go to Site Navigation > Security > AXIS Optimizer Security.

2. Clear Enable Role settings.

3. Restart Management Client.

4. Restart all running Smart Clients in your system.

In AXIS Optimizer, you can use AXIS Device Manager Extend to manage devices from multiple sites. By setting up edge hosts on recording servers, AXIS Device Manager Extend can connect to your devices in the Milestone XProtect system. It makes it easy to review warranty information and perform firmware upgrades on multiple devices and sites from a single user interface.

For more information about AXIS Device Manager Extend, see the user manual.

Edge host is an on-premise management service that makes it possible for AXIS Device Manager Extend to communicate with your local devices in the Milestone XProtect system.

The edge host and the desktop client need to be installed to use AXIS Device Manager Extend in Milestone XProtect. Both the edge host and the desktop client are included in the AXIS Device Manager Extend installer.

1. Download the AXIS Device Manager Extend installer.

   The edge host must be installed on the Milestone XProtect recording servers.

2. Run the installer on the recording server and only select to install the edge host.

See the Axis Device Manager Extend user manual for more information about open network ports and other requirements.

1. Open Management Client.

2. Go to Site Navigation > AXIS Optimizer > System overview.

3. Select and log in to MyAxis.

4. Click on a recording server tile with an installed edge host ready to be claimed.

5. In the sidebar, create a new organization or select a previously created organization.

6. Click and claim the edge host.

7. Wait until the page has reloaded and click Synchronize.

   All Axis devices on the recording server will now be added to the edge host and belong to the organization that you selected.

8. Note

   AXIS Device Manager Extend must be able to access the Axis hardware in Milestone XProtect. For more info about supported devices, see Troubleshooting for adding devices to the edge host.

9. If you add new devices to a recording server or change any device information, you need to perform step 7 again to synchronize the changes with the AXIS Device Manager Extend system.

10. Repeat steps 4-7 for all recording servers with devices that you want to add to AXIS Device Manager Extend.

On each recording server in System overview, you can see whether or not the edge host has been installed or claimed yet. You can turn on Show machines that need edge host action to filter the view.

• – No edge host was detected on the recording server.

• • If no edge host has been installed, download and install the edge host on the recording server. See Install the edge host.

  • If edge host is installed, this means that you need to log in to MyAxis account to be able to detect the edge host.

• – The edge host is installed but not claimed. Claim the edge host by creating a new organization or select a previously created organization. See Claim the edge host and synchronize devices.

• – The edge host is installed and claimed but unreachable. Check if the recording server has internet access.

• – The edge host is synchronized.

• – The edge host needs synchronization. It can be new devices in the VMS that can be added to the edge host or updated device information that needs to be synchronized.

When the devices have been synchronized to the edge host, you can configure the devices in AXIS Device Manager Extend. You can do this from any PC connected to the internet.

1. Install and open the AXIS Device Manager Extend desktop application.

2. Select the organization that was used to claim the edge host.

3. The synchronized devices can be found under a site with the same name as the Milestone XProtect recording server.

If you have trouble adding devices to the edge host, make sure to do the following:

• AXIS Optimizer will only add enabled hardware from Milestone XProtect.

• Check that the connection with the hardware isn’t broken in Milestone XProtect.

• Make sure that the device has firmware 6.50 or higher.

• Make sure that the device is set to digest authentication. By default, AXIS Device Management does not support basic authentication.

• Try to add devices directly from the AXIS Device Manager Extend application.

• Collect logs from AXIS Device Manager Extend and contact Axis support.

• 1. In AXIS Device Manager Extend application, go to the specific site, on the recording server, where the camera is installed.

  2. Go to Settings and click Download sitelog.

In AXIS Optimizer, you can import your AXIS Site Designer design project and apply the configuration to your VMS in one easy import process. Use AXIS Site Designer to design and configure your system. Once your project is finished you can import settings for all cameras and other devices from AXIS Site Designer to Management Client using AXIS Optimizer.

For more information about AXIS Site Designer, see the user manual.

In AXIS Site Designer

1. Create a project and configure the devices.

2. Once you are finished with your project, generate a code or download the settings file.

3. Note

   If you make any updates to your design project, you need to generate a new code or download a new settings file.

In Management Client

1. Make sure that relevant devices are added to your VMS.

2. Go to Site Navigation > AXIS Optimizer > Import design project.

3. A step-by-step guide opens up. Select the project you want to import by either entering the access code or selecting the project’s settings file. Click Next.

4. In Project overview you can see information about how many devices are found in the AXIS Site Designer project and how many devices are found in the VMS. Click Next.

5. In the next step, devices in the VMS are matched to devices in the AXIS Site Designer design project. Devices with only one possible match are automatically selected. Only devices that are matched will be imported. When you’re finished matching, click Next.

6. Settings for all the matched devices are imported and applied to your VMS. This can take several minutes depending on the size of the design project. Click Next.

7. In Results of import you can find details about the different steps of the import process. If some settings couldn’t be imported, fix the problems and run the import again. Click Export... if you’d like to save the list of result as a file. Click Done to close the step-by-step guide.

Only devices that are matched between the VMS and the design project are part of the import. The following settings are imported and applied to the VMS for all device types:

• Device name used in the design project

• Device description used in the design project

• Geolocation settings, if the device is placed on a map

If the device is a video-enabled device, the following settings are applied as well:

• One or two video streams configured in the VMS (resolution, frame rate, codec, compression and Zipstream settings)

• • Video stream 1 is configured for live view and recording.

  • Video stream 2 is configured for recording, if the stream settings in the design project differ between the live view and recording.

• Rules for motion detection or continuous recording are set up according to the design project. Milestone XProtect built-in motion detection is used, time profiles for the rules are created, and storage profiles for different retention times are created on the recording servers.

• Microphone is turned on or off according to the audio settings in the design project.

There are limitations in Milestone Xprotect when it comes to import of AXIS Site Designer design projects.

• The default motion recording rule in the VMS can override the recording rules created by the import. Turn off any conflicting rules or exclude affected devices from the rules.

• Recording estimates can be inaccurate for Milestone XProtect motion-triggered recordings.

• Floor plans are not supported in current version.

• If both motion-triggered recordings and continuous recordings are configured simultaneously in the design project, only stream settings from the motion-triggered recording settings will be used.

• You can’t configure minimum frame rate for Zipstream in Milestone XProtect.

Account management helps you manage the accounts and passwords on all Axis devices used by XProtect.

According to Axis guidelines, you shouldn’t use root account to connect to devices. With Account management you can create an XProtect service account. Unique 16-character passwords are created for each device. Devices that already have the XProtect account get new passwords.

1. Go to Site Navigation > AXIS Optimizer > Account management.

   The graph shows how many devices that are online, how many of these that have the XProtect service account and how many that don’t have the XProtect service account.

2. Click Show device details to see more information about the devices. Devices that are online are shown at the top of the list. You can select specific devices to generate passwords for. If none are selected, all devices that are online will get new passwords. Click OK.

3. Click Generate passwords.

   Click Show device details to see live status updates of the process. During the process, you will see a short interruption of active live views and pending recordings.

4. Devices that are online get the XProtect service account and new passwords. Devices that are online and already had the XProtect service account only get new passwords.

The Axis events feature gives an overview of available events for Axis devices in your Milestone XProtect system. You can test events on a specific device, view details about the events, and add events to multiple devices.

In Site Navigation, go to Rules and Events > Axis events. A list of all available events is shown in the Configuration window. You can see which events are active in your system and which events that are not active.

For each event you can see the device name of the devices that the event is added to. You can also see the event display name, state of the event and last time the event was triggered.

1. Go to Configuration and select an event.

2. Click Add devices.

3. The Add devices window shows a list of devices to which the event can be added. Select one or more devices and click Add devices.

To remove an event from a device, click Remove.

In Axis events, you can view the last known occurrence, state of events, and real-time updates in the user interface. To do that, you need to set the retention time in Management Client.

1. Go to Tools > Options > Alarm and Events > Event retention.

2. Set the retention time for the entire device events group or specific events within the group.

Metadata and search gives an overview of all the devices you added in your VMS and allows you to turn on specific features for these devices. In Metadata and search, you can turn on event data, analytics data, and consolidated data for multiple devices, and also view the analytics features supported by your devices.

To configure metadata settings:

1. Go to Management Client > Site Navigation > AXIS Optimizer > Metadata and search.

2. • Event data: Turn on for your VMS to retrieve event data from the device. You need this for several features in AXIS Optimizer.

   • Analytics data: Turn on to use the forensic search feature and show bounding boxes in live view and playback.

   • Analytics features: View the video analytics features that your device currently supports such as object type (humans, cars) and object color. Upgrading the firmware may give more analytics features.

   • Consolidated metadata: Turn on to perform faster forensic search on your device.

   • Note

     Consolidated metadata requirements

     • Axis devices with firmware version 11.10 or later.

     Consolidated metadata limitations

     • Bounding boxes in live view and recording, and the VMS built-in search options are not available.

If you have technical issues, turn on debug logging, reproduce the problem and then share these logs with your Axis support.

To turn on debug logging:

1. In Smart Client, go to Settings > Axis general options and select Turn on debug logging.

To check which AXIS Optimizer features your client supports:

1. In Smart Client, go to Settings > Axis general options and select Show compatibility info.

If you need more help, go to axis.com/support.

AXIS Optimizer allows you to an display almost any web pages directly in Smart Client, not only html pages. This web view is powered by a modern browser engine and compatible with most web pages. This is useful, for example when you want to access AXIS Body Worn Manager from Smart Client or show a dashboard from AXIS Store Reporter next to your live views.

1. In Smart Client, click Setup.

2. Go to Views.

3. Create new view or select an existing one.

4. Go to System overview > AXIS Optimizer.

5. Click Web view and drag it into the view.

6. Enter an address and click OK.

7. Click Setup.

To view videos with embedded AXIS Optimizer search functions, make sure to export videos in the XProtect format. This can be helpful, for example, for demo purposes.

1. In Smart Client, go to Settings > Axis search options.

2. Turn on Include search plugins in exports.

3. Select XProtect format when creating the export in Smart Client.

To successfully use the export on another computer make sure to unblock the export file archive.

1. On the receiving computer, right-click the export file (zip) and select Properties.

2. Under General click Unblock > OK.

3. Extract the export and open the file “SmartClient-Player.exe".