AXIS P1280–E Thermal Network Camera

When you connect a sensor unit to a main unit, we recommend that you make the connection before you power up the main unit. If you disconnect a sensor unit and connect a different one, you must restart the main unit.

The sensor unit is delivered with a cable. To shorten the cable follow these steps:

1. Cut the cable to the desired length. Measure from the sensor unit.

2. Strip the plastic outer coating from the end of the cable.

3. Peel back the shield.

4. Flatten the colored wires in the order described below.

5. 1	Brown
   2	White/brown
   3	Not used
   4	Not used
   5	White/blue
   6	Blue

6. NOTICE

   Make sure that the wires stay in the correct order and that the cable shield makes good contact with the connector shield.

7. Insert the wires all the way into a shielded 6P6C RJ12 connector.

8. Use a crimping tool to fasten the connector to the cable.

To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support.

For more information about how to find and assign IP addresses, go to How to assign an IP address and access your device.

1. Open a browser and enter the IP address or host name of the Axis device.

   If you do not know the IP address, use AXIS IP Utility or AXIS Device Manager to find the device on the network.

2. Enter the username and password. If you access the device for the first time, you must set the root password. See Set a new password for the root account.

3. The live view page opens in your browser.

The device password is the primary protection for your data and services. Axis devices do not impose a password policy as they may be used in various types of installations.

To protect your data we strongly recommend that you:

• Use a password with at least 8 characters, preferably created by a password generator.

• Don’t expose the password.

• Change the password at a recurring interval, at least once a year.

1. Type a password. Follow the instructions about secure passwords. See Secure passwords.

2. Retype the password to confirm the spelling.

3. Click Create login. The password has now been configured.

You can access the built-in help from the device’s webpage. The help provides more detailed information on the device’s features and their settings.

Use corridor format to better utilize the full field of view in a long and narrow area, for example a staircase, hallway, road, or tunnel.

1. Depending on your device, turn the camera or the 3-axis lens in the camera 90° or 270°.

2. If the device doesn’t have automatic rotation of the view, log in to the webpage and go to Settings > System > Orientation.

3. Click .

4. Rotate the view 90° or 270°.

Find out more at axis.com/axis-corridor-format.

Color palettes applied to thermal images help the human eye distinguish image details. The colors in the palette are artificially created pseudocolors that emphasize temperature differences.

The product has several color palettes to choose from. If an operator watches the video stream, you can choose any of the palettes. If the video stream is only used by applications, select the white-hot palette.

A privacy mask is a user-defined area that prevents users from viewing a part of the monitored area. In the video stream, privacy masks appear as blocks of solid color.

You’ll see the privacy mask on all snapshots, recorded video, and live streams.

You can use the VAPIX® application programming interface (API) to turn off the privacy masks.

You can create one or several privacy masks to hide parts of the image.

1. Go to Settings > Privacy mask.

2. Click New.

3. Adjust the size, color, and name of the privacy mask according to your needs.

Overlays are superimposed over the video stream. They are used to provide extra information during recordings, such as a timestamp, or during product installation and configuration. You can add either text or an image.

You can add an image as an overlay in the video stream.

This example explains how to display the text “Motion detected” when the device detects motion.

Make sure that AXIS Video Motion Detection is running:

1. Go to Settings > Apps > AXIS Video Motion Detection.

2. Start the application if it is not already running.

3. Make sure you have set up the application according to your needs.

4. Add the overlay text:

5. Go to Settings > Overlay.

6. Enter #D in the text field.

7. Choose text size and appearance.

8. Create a rule:

9. Go to System > Events > Rules and add a rule.

10. Type a name for the rule.

11. In the list of conditions, select AXIS Video Motion Detection.

12. In the list of actions, select Use overlay text.

13. Select Camera 1.

14. Type “Motion detected”.

15. Set the duration.

16. Click Save.

Bitrate control helps you to manage the bandwidth consumption of your video stream.

Variable bitrate (VBR)Variable bitrate allows the bandwidth consumption to vary depending on the level of activity in the scene. The more activity, the more bandwidth you need. With variable bitrate you are guaranteed constant image quality, but you need to make sure you have storage margins.

Maximum bitrate (MBR)Maximum bitrate lets you set a target bitrate to handle bitrate limitations in your system. You might see a decline in image quality or frame rate as the instantaneous bitrate is kept below the specified target bitrate. You can choose to prioritize either image quality or frame rate. We recommend that you configure the target bitrate to a higher value than the expected bitrate. This gives you a margin in case there is a high level of activity in the scene.

1. Target bitrate

Average bitrate (ABR)With average bitrate, the bitrate is automatically adjusted over a longer period of time. This is so you can meet the specified target and provide the best video quality based on your available storage. Bitrate is higher in scenes with a lot of activity, compared to static scenes. You are more likely to get better image quality when in scenes with a lot of activity if you use the average bitrate option. You can define the total storage required to store the video stream for a specified amount of time (retention time) when image quality is adjusted to meet the specified target bitrate. Specify the average bitrate settings in one of the following ways:

• To calculate the estimated storage need, set the target bitrate and the retention time.

• To calculate the average bitrate, based on available storage and required retention time, use the target bitrate calculator.

• 
  1. Target bitrate
  2. Actual average bitrate
• You can also turn on maximum bitrate and specify a target bitrate within the average bitrate option.
• 
  1. Target bitrate
  2. Actual average bitrate

Decide which compression method to use based on your viewing requirements, and on the properties of your network. The available options are:

Motion JPEG

Motion JPEG, or MJPEG, is a digital video sequence that is made up of a series of individual JPEG images. These images are then displayed and updated at a rate sufficient to create a stream that shows constantly updated motion. For the viewer to perceive motion video the rate must be at least 16 image frames per second. Full motion video is perceived at 30 (NTSC) or 25 (PAL) frames per second.

The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every image contained in the stream.

H.264 or MPEG-4 Part 10/AVC

H.264 can, without compromising image quality, reduce the size of a digital video file by more than 80% compared to the Motion JPEG format and by as much as 50% compared to older MPEG formats. This means that less network bandwidth and storage space are required for a video file. Or seen another way, higher video quality can be achieved for a given bitrate.

1. Go to live view and select H.264.

2. Go to Settings > Stream.

3. Do one or more of the following:

4. • Turn on the Zipstream functionality and select the desired level.

   • Turn on dynamic GOP and set a high GOP length value.

   • Increase the compression.

   • Turn on dynamic FPS.

1. To store recordings on the network, you need to set up your network storage.

2. Go to Settings > System > Storage.

3. Click Setup under Network storage.

4. Enter the IP address of the host server.

5. Enter the name of the shared location on the host server.

6. Move the switch if the share requires a login, and enter username and password.

7. Click Connect.

The Image tab contains camera settings that affect all video streams from the product. If you change something in this tab, it immediately affects all video streams and recordings.

The Stream tab contains settings for video streams. You get these settings if you request a video stream from the product and don’t specify for example resolution, or frame rate. When you change the settings in the Stream tab, it doesn’t affect ongoing streams, but it will take effect when you start a new stream.

The Stream profiles settings override the settings from the Stream tab. If you request a stream with a specific stream profile, the stream contains the settings of that profile. If you request a stream without specifying a stream profile, or request a stream profile that doesn't exist in the product, the stream contains the settings from the Stream tab.

To record video you must first set up network storage, see Set up network storage, or have an SD card installed.

1. Record video

2. Go to the live view.

3. To start a recording, click Record. Click again to stop the recording.

1. Watch video

2. Click Storage > Go to recordings.

3. Select your recording in the list and it will play automatically.

You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions. The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects motion, or show an overlay text while the device is recording.

To learn more, check out our guide Get started with rules for events.

1. Go to Settings > System > Events to set up a rule. The rule defines when the device will perform certain actions. Rules can be setup as scheduled, recurring, or for example, triggered by motion detection.

2. Select the Condition that must be met to trigger the action. If you specify more than one condition for the rule, all of the conditions must be met to trigger the action.

3. Select which Action the device should perform when the conditions are met.

This example explains how to set up the camera to start recording to the SD card five seconds before it detects motion and to stop one minute after.

1. Make sure that AXIS Video Motion Detection is running:

2. Go to Settings > Apps > AXIS Video Motion Detection.

3. Start the application if it is not already running.

4. Make sure you have set up the application according to your needs. If you need help, see the user manual for AXIS Video Motion Detection 4.

1. Create a rule:

2. Go to Settings > System > Events and add a rule.

3. Type a name for the rule.

4. In the list of conditions, under Application, select AXIS Video Motion Detection (VMD).

5. In the list of actions, under Recordings, select Record video while the rule is active.

6. Select an existing stream profile or create a new one.

7. Set the prebuffer time to 5 seconds.

8. Set the postbuffer time to 60 seconds.

9. In the list of storage options, select SD card.

10. Click Save.

AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications.

To find the user manuals for Axis applications, go to help.axis.com.

To reset the product to the factory default settings:

1. Disconnect power from the product.

2. Press and hold the control button while reconnecting power. See .

3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber.

4. Release the control button. The process is complete when the status LED indicator turns green. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90.

5. Use the installation and management software tools to assign an IP address, set the password, and access the video stream.

   The installation and management software tools are available from the support pages on axis.com/support.

It is also possible to reset parameters to factory default through the web interface. Go to Settings > System > Maintenance and click Default.

Firmware is the software that determines the functionality of network devices. One of your first actions when troubleshooting a problem should be to check the current firmware version. The latest version may contain a correction that fixes your particular problem.

To check the current firmware:

1. Go to the product’s webpage.

2. Click the help menu .

3. Click About.

AXIS Device Manager can be used for multiple upgrades. Find out more at axis.com/products/axis-device-manager.

1. Download the firmware file to your computer, available free of charge at axis.com/support/firmware.

2. Log in to the product as an administrator.

3. Go to Settings > System > Maintenance. Follow the instructions on the page. When the upgrade has finished, the product restarts automatically.

If you can’t find what you’re looking for here, try the troubleshooting section at axis.com/support.

When setting up your system, it is important to consider how various settings and situations affect the performance. Some factors affect the amount of bandwidth (the bitrate) required, others can affect the frame rate, and some affect both. If the load on the CPU reaches its maximum, this also affects the frame rate.

The following factors are the most important to consider:

• High image resolution or lower compression levels result in images containing more data which in turn affects the bandwidth.

• Rotating the image in the GUI will increase the product's CPU load.

• Access by large numbers of Motion JPEG or unicast H.264 clients affects the bandwidth.

• Simultaneous viewing of different streams (resolution, compression) by different clients affects both frame rate and bandwidth.

  Use identical streams wherever possible to maintain a high frame rate. Stream profiles can be used to ensure that streams are identical.

• Accessing Motion JPEG and H.264 video streams simultaneously affects both frame rate and bandwidth.

• Heavy usage of event settings affects the product’s CPU load which in turn affects the frame rate.

• Using HTTPS may reduce frame rate, in particular if streaming Motion JPEG.

• Heavy network utilization due to poor infrastructure affects the bandwidth.

• Viewing on poorly performing client computers lowers perceived performance and affects frame rate.

• Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect the frame rate and the general performance.

• Using palettes affects the product’s CPU load which in turn affects the frame rate.

This product supports microSD/microSDHC/microSDXC cards.

For SD card recommendations, see axis.com.

microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.

• The control button is used for:

• Resetting the product to factory default settings. See Reset to factory default settings.

RJ45 Ethernet connector with Power over Ethernet (PoE).

The RJ12 connector is used for connecting the sensor unit to the main unit.

For information on how to shorten the sensor unit cable see .