Power output options
Troubleshooting
LED indicators
POWER ON STATUS | ||
Color | State | Indication |
Green | Solid | Internal power converter on and ready to apply power to output ports |
Green | Flashing | Internal power converter in light load condition |
LINK: link speed | ||||||||||
Color | State | Indication | ||||||||
Amber | Solid | 100M/1000M link speed | ||||||||
Amber | Off | 10M link speed | ||||||||
ACT: activity | ||||||||||||||||||||
Color | State | Indication | ||||||||||||||||||
Green | Solid/flashing | Data transmission in progress | ||||||||||||||||||
PoE PSE POWER IN | ||
Color | State | Indication |
Green | Solid | Power over Ethernet (PoE) 802.3bt Type 4 Class 8 power sourcing equipment connected |
PoE STATUS | |||||||
Color | State | Indication | |||||
Green | Solid | Valid Power over Ethernet (PoE) IEEE 802.3af/at PD detected | |||||
Green | Flashing | Standing by | |||||
Red | Solid | Overload/overcurrent detected | |||||
Red | Flashing | Invalid Power over Ethernet (PoE) IEEE 802.3af/at PD detected | |||||
Technical issues, clues, and solutions
| Problems turning on the camera | |
Compatibility issue | Make sure the camera is compatible with the PoE extender. For a list of compatible products, see the PoE extender’s product page at axis.com |
LLDP protocol | Turn off LLDP. In the camera’s web interface, go to System > Plain config, select group Network, and clear LLDP Send Max PoE. |